Amass XT90H Male & Female Connector Pair with 10AWG Silicone Wire Pigtails - 15cm

Specifications

• Connector 1: Amass XT90H Female (Socket) - For Battery

• Connector 2: Amass XT90H Male (Pins) - For Device/ESC

• Wire Gauge: 10AWG (Heavy Duty - 90A Rated)

• Wire Length: 15 cm per pigtail (30cm total loop)

• Insulation: Soft Silicone (200°C Rated)

• Conductor: Tinned Copper

• Rated Current: 90A Continuous / 120A Peak

• Housing Material: Amass High-Temp Nylon + Sheath

Key Applications & Projects

• New Drone Builds: The standard "Starter Kit" for wiring a new Hexacopter or Octocopter.

• Connector Conversion: Completely convert a system (e.g., from EC5 or Deans) to the superior XT90 standard.

• Extension Leads: Solder the two pigtails together to create a 30cm XT90 Extension Cable.

Unlock New Capabilities (Project Evolution)

• Prerequisites: A soldering iron capable of handling 10AWG (80W+ recommended).

• Feature Upgrade: Installing this pair ensures your entire power train is "90A Ready", allowing you to upgrade motors or batteries later without rewiring.

• Effort Level: Intermediate.

Virtual Technician & Wiring

• ⚠️ Polarity Match:

  • Red Wire: Positive (+) on Flat Side.

  • Black Wire: Negative (-) on Chamfered Side.

  • Tip: Connect the Male and Female connectors together while soldering the wire ends to your device. The metal pins inside act as a heatsink, preventing the plastic housing from softening.

Accessories & Parts

What's Included:

• 1 x Amass XT90H Female Pigtail (15cm)

• 1 x Amass XT90H Male Pigtail (15cm)

Required Alternatives:

• Spark Protection: If using >6S voltage, consider swapping the Male connector for an XT90-S Anti-Spark version.

Frequently Asked Questions (FAQ)

1. Does this include both sides? Yes, one Male pigtail and one Female pigtail.

2. Is it cheaper to buy the set? Yes, you save compared to buying them separately.

3. Is the wire 10AWG on both? Yes, genuine 10AWG silicone wire on both leads.

4. Can I connect them to make an extension? Yes, if you solder the wire ends together, you get a ~30cm extension.

5. Is it compatible with XT90-S? Yes, fully compatible.

6. What is the max voltage? Rated for 500V DC.

7. Is the connector Amass? Yes, 100% Genuine Amass.

8. Will this fit my 22000mAh battery? Yes, perfect for large capacity packs.

9. Do I need heat shrink? No, the "H" sheath covers the connector joints. You need heat shrink for the other end of the wires.

10. Is it waterproof? No.

11. Can I use this for my solar generator? Yes, standard for high-power portable solar.

12. Is the wire flexible? Yes, soft silicone.

13. Can I use crimps? We recommend soldering for 90A currents.

14. Why is it yellow? Standard color for XT90 nylon.

15. Is polarity marked? Yes, on the housing.

16. Can I separate the sheath? It snaps on tightly; difficult to remove once locked.

17. What iron should I use? At least 60W, preferably 80W+ with a large tip.

18. Is the wire copper? Yes, Tinned Copper.

19. Can I use this for 100A? For short bursts (10-20 seconds), yes. For continuous, keep it under 90A.

20. Is this available in black? This listing is for the standard Yellow version.