Amass XT60H Female to XT30 Male Adapter Cable - 16AWG Silicone Wire (10cm)

Specifications

• Input Connector: Amass XT60H Female (Connects to Charger)

• Output Connector: Amass XT30 Male (Connects to Battery)

• Wire Gauge: 16AWG (Standard for XT30)

• Wire Length: 10 cm

• Insulation: Soft Silicone (200°C Rated)

• Max Charge Current: 30A (Limited by XT30)

• Conductor: Tinned Copper

• Housing Material: Amass High-Temp Nylon

Key Applications & Projects

• Charging Adapter: The primary use—convert an XT60 charge lead into an XT30 charge lead.

• Bench Testing: Power a small XT30 drone or project from a large XT60 battery or power supply.

• Parallel Charging: Use this to connect a single XT30 battery to an XT60 parallel board (carefully!).

Unlock New Capabilities (Project Evolution)

• Prerequisites: You have an XT60 Charger and an XT30 Battery.

• Feature Upgrade: Stop using sketchy "alligator clip" adapters. This dedicated Amass adapter provides a solid, spark-free connection for your expensive LiPos.

• Effort Level: Plug & Play.

Virtual Technician & Wiring

• ⚠️ Direction Check:

  • XT60H Female: Plugs into XT60 Male (Source/Charger).

  • XT30 Male: Plugs into XT30 Female (Load/Battery).

  • If you need the reverse (XT60 Battery to XT30 Drone), you need the Male-to-Female version.

• Current Limit: While the XT60 end can handle 60A, the XT30 end is limited to 30A. Do not push more than 30A through this adapter.

Accessories & Parts

What's Included:

• 1 x Amass XT60H Female to XT30 Male Adapter Cable (10cm)

Required Alternatives:

• Reverse Adapter: For running an XT60 battery on an XT30 drone, use the XT60 Male to XT30 Female adapter.

Frequently Asked Questions (FAQ)

1. Will this fit my ISDT Q6 Nano? Yes, the Q6 Nano has an XT60 output. This adapter lets you plug XT30 batteries into it.

2. What does "XT60H" mean? The "H" stands for the plastic Housing/Sheath on the back. It replaces heat shrink for a cleaner look.

3. Is this for the battery or the drone? This connects a Charger to a Battery.

4. Can I use this to fly? Yes, if you want to power an XT30 drone with an XT60 battery (using the reverse gender of this cable). Check gender carefully.

5. Is the wire silicone? Yes, Amass-spec 16AWG silicone wire.

6. Can I charge at 20A? Yes, the XT30 and wire can handle 20A charging easily.

7. Is Amass better than generic? Yes, Amass uses higher temp nylon and gold-plated pins that don't oxidize as quickly.

8. What is the length? 10cm.

9. Is it waterproof? No.

10. Does it spark? No, standard connectors (unless XT90-S).

11. Can I use this for 6S LiPos? Yes, voltage is not an issue.

12. Why is the XT30 called Male? Because it has Pins, even though it fits inside the battery connector.

13. Is the polarity standard? Yes, Red (+) to Square, Black (-) to Chamfered.

14. Can I chain adapters? Avoid chaining if possible (increases resistance), but for charging, it's safe.

15. Is the soldering reliable? Yes, factory soldered with Amass QC.

16. Can I use this for discharge? Yes, up to 30A.

17. Is the wire copper? Yes, Tinned Copper.

18. Will it fit non-Amass XT30s? Yes, Amass is fully compatible with generic XT connectors.

19. Does it come with caps? No.

20. Is this available in 14AWG? No, 16AWG is the standard max for XT30.