U.FL (IPEX) to RP-TNC Male Connector Cable - 15cm (Reverse Polarity Plug with Hole)

Specifications

• Connector A: U.FL (IPEX 1 / MHF1) Female

• Connector B: RP-TNC Male (Reverse Polarity)

• Pin Configuration: Female Socket (Hole)

• Thread Type: 7/16-28 UNEF (Internal Threads)

• Cable Type: 1.13mm Micro Coaxial

• Impedance: 50 Ohms

• Length: 15 cm

• Frequency Range: DC to 6 GHz

Key Applications & Projects

• Router Modding: Connecting an internal module directly to a high-power Cisco AP board for testing.

• Industrial IoT: Interfacing with legacy industrial wireless gateways that use RP-TNC bulkheads.

• Cable Extension: Connecting a module to a long-run RP-TNC extension cable.

Virtual Technician & Wiring

• ⚠️ Gender Check:

  • RP-TNC Male (This Cable): Has a Hole. Threads are Inside. Mates with Device Ports.

  • Standard TNC Male: Has a Pin. Threads are Inside. (Not compatible).

  • Usage Rule: Check your target device port. If it has a Pin sticking out and threads on the outside, you need this cable.

Accessories & Parts

What's Included:

• 1 x U.FL (IPEX) to RP-TNC Male Connector Cable (15cm)

Compatible Upgrades:

• Adapter: RP-TNC Female to SMA Male (to convert Cisco antennas to standard SMA).

Frequently Asked Questions (FAQ)

1. Will this fit my Cisco Aironet AP? YES. Cisco APs have RP-TNC Female ports (Pin + Ext Threads). This cable (Hole + Int Threads) will screw directly onto the AP ports.

2. Will this connect to a Cisco Antenna? NO. Cisco Antennas are also RP-TNC Male (Plugs). You cannot connect Plug to Plug. You need the Bulkhead Female version to connect to an antenna.

3. Does the connector have a pin or a hole? This is RP-TNC Male, so it has a HOLE in the center.

4. Is this the same as BNC? No, TNC is threaded. BNC is twist-lock.

5. Is the cable 1.13mm? Yes.

6. Will this fit a Linksys WRT54G? Yes, the WRT54G uses RP-TNC connectors.

7. Is it waterproof? No.

8. Can I use this for 5GHz WiFi? Yes, suitable for dual-band WiFi.

9. Does it come with a nut? No, this is a Plug. It screws onto a jack.

10. Is the contact gold plated? Yes.

11. What is the impedance? 50 Ohms.

12. Can I use this for GPS? Only if your GPS uses RP-TNC (rare). Most GPS uses Standard TNC.

13. Is the IPEX connector compatible with ESP32? Yes.

14. Why is it called "Male" if it has a hole? In Reverse Polarity, the thread determines gender (Internal threads = Male), but the contact is reversed (Hole).

15. Can I extend it? Yes, with an RP-TNC Female to Male extension.

16. Is it compatible with TNC Male? No, the pin/hole configuration will clash.

17. Is the body brass? Yes, Nickel-plated brass.

18. Can I use this for LoRa? Yes, if using RP-TNC gear.

19. Will this fit M.2 cards? No, M.2 uses IPEX 4.

20. What if I need to mount an antenna? Buy the RP-TNC Female Bulkhead pigtail instead.