Creality 3D Printer Filament Dryer Box

3D Printer Filaments absorb moisture when exposed to air. When the moisture content build up in the filament, it leads to deteriorating print quality. This 3D Printer Drying Box from Creality will remove the moisture from your filament, and mainting the optimal temperature/moisture of the filament to get the best quality print from your printer/filament.

This 3D Printer Filament Storage Box is designed to keep filaments dry and to dehumidify the filaments. The box removes moisture by heating and maintain an airtight seal. The filament can be heated in the box for hours at a certain temperature.

Why is filament drying important?

If print materials are too moist, this affects the print quality. The print gets air bubbles, warped edges or pulls unsightly strings.
These unpleasant printing errors can be avoided by drying the filament.

Compatible with a wide variety of materials

The filament dry box is compatible with most 1kg filament spools on the market and is suitable for filaments with an outer diameter of up to 200 mm and a maximum width of 75 mm.

Easy Operation

The temperature and heating time can be easily set using a rotary knob. The filament can be heated from 2 to 8 hours in set intervals.

Demo Video - Creality 3D Printer Dry Box

Creality3D Filament Storage Heated Dry Box Creality filament dry box Features - 

• Keeps filament dry by Heating. This box can dry a filament with high moisture content too
• It comes with a weighing feature and you can measure the quantity of filament left. Useful for estimating the filament available for printing.
• Compatible with 1-kg spools of PLA, ABS, PETG, and TPU. Adapts to a variety of wire diameters.
• Compatible with most of the 1kg filament reels on the market and different filaments with a variety of wire diameters - 1.75mm/2.85mm/3.00mm.
• Operating time adjustment range: off /2 /4 / 8 hours / normally on.
• Works on AC Mains Voltage: 100 to 240V AC, Power: 155W
• Digital display to time
• Heating Temperature: 50 °C, 60 °C, 70 °C,
• It comes with no dust design (100% dust free)
• It is a ‘must have’ product for 3D FDM printer
• Drying PLA filament can take up to 2 hours whereas 24 hours or more for drying TPU
• Never heat Nylon for too long because if you dry it too much it would turn brittle. This material needs some moisture for printing
• Suitable for storing 3D Printer Filament. If you are not going to use filaments for a long time it’s best to dry them up for at least 4-5 hours and keep them in a sealed container even if they are not hygroscopic
• Use a filament dry box and the result will be the same as when you print with a brand-new filament.

Package Includes:

• 1 x Creality Filament Dry Box