These E3D 3D printer Hot Ends are regarded as one of the best metal hot ends for 3D Printers. They are suitable for printing the widest range of print materials with excellent print results, allowing for soft flexible materials and higher temperature filaments such as polycarbonate and Nylons. They offer comparatively better print quality compared to other hotends.
The E3D J Head Hotend comes in two types - Direct Drive and Bowden Drive. This is the Bowden Drive model. On a bowden drive, the bulky extruder is not mounted on the hotend. This results in a slightly complex construction, usage and maintenance. But Bowden Drive Extruders offer best print quality. Chose Direct drive for easy assembly and maintenance and Bowden Drive for best print quality.
These well crafted hot ends are renowned for their print quality, minimal blockading, fast response and efficient thermal properties, eliminating hot ends meltdown failures. This hot ends with the supplied thermistor can reach 300 degrees C (can reach 400 degree C with however may require additional electronics) and will heat from 20C to 200C in 65 seconds and the temperature control responsiveness will keep the HotEnd within 0.5 degrees C. We also offer a large range of nozzle sizes to suit your 3D Printing needs. 0.4mm is standard and comes with this hotend.