V2 SOP16 SSOP16 to DIP16 Adapter PCB - 0.65mm & 1.27mm Double-Sided Converter

Specifications

• Board Dimensions: 21mm x 15mm

• Material: High-quality FR-4 Glass Fiber

• Pitch 1 (Front): 1.27mm (for SOP16/SOIC16)

• Pitch 2 (Back): 0.65mm (for SSOP16/TSSOP16)

• DIP Output Pitch: Standard 2.54mm (0.1 inch)

• Pin Count: 16 Pins

Key Applications & Projects

• Wide-Body IC Testing: Specifically designed to handle wide-body surface-mount packages that may not fit standard narrow adapters.

• Audio Prototyping: Ideal for testing high-performance 16-pin SMD operational amplifiers or DACs.

• Microcontroller Development: Break out 16-pin micro-packaged controllers for easy wiring to an Arduino or ESP32.

Unlock New Capabilities (Project Evolution)

• Feature Upgrade: This board essentially turns a fixed surface-mount chip into a modular plug-in unit, allowing for easy swapping between different prototype boards during the tuning phase.

• Effort Level: Intermediate. Requires steady hands and basic SMD soldering techniques to mount the chip and the 2.54mm headers.

Package Includes:

• 1 x V2 SOP16 / SSOP16 to DIP16 Double-Sided Adapter PCB

FREQUENTLY ASKED QUESTIONS (FAQ)

1. Can I mount chips on both sides at once? No, the through-holes for the DIP headers are shared; you should only mount one component per board.

2. What is the lead pitch for SOP16? The SOP side features a standard 1.27mm pitch.

3. What is the lead pitch for TSSOP16? The SSOP side features a 0.65mm pitch.

4. Will this fit a standard breadboard? Yes, it converts the SMD pins to standard 2.54mm spacing that fits all breadboards.

5. What are the dimensions of the PCB? The board measures 21mm by 15mm.

6. Does it come with header pins? No, 2.54mm male headers must be purchased separately.

7. Which side is for SOIC16? Use the 1.27mm pitch side.

8. Is it compatible with MSOP16? Yes, most MSOP16 chips with a 0.65mm pitch will fit the SSOP side.

9. Can I use this for chips with fewer than 16 pins? Yes, as long as the pitch matches, you can center smaller pin-count chips on the pads.

10. Is the PCB material heat-resistant? Yes, the FR-4 material is rated for standard soldering temperatures.

11. How do I identify Pin 1? Pin 1 is indicated by a small triangle/dot on the silk screen.

12. Do I need a special iron for the 0.65mm side? A fine-tip soldering iron or hot air station is recommended for the smaller pitch.

13. Is this a wide-body adapter? Yes, the pad layout is specifically optimized for wide-body SMD packages.

14. Are the pads pre-tinned? Yes, the pads feature high-quality plating for easy solder wetting.

15. What is the diameter of the output holes? They are standard 1mm holes designed for 2.54mm pin headers.

16. Can I use this with a DIP socket? Yes, once headers are attached, it can be plugged into a standard 16-pin DIP socket.

17. What is the row spacing for the DIP output? It is standard 0.6-inch (15.24mm) spacing.

18. What color is the PCB? The board is standard green with white silk screening.

19. Can I reuse the board? Yes, if the component is desoldered carefully, the PCB can be reused.

20. Why are there two different side designs? Different IC standards use different pitches; this dual-sided board maximizes compatibility for the two most common 16-pin SMD standards.