M6 Sliding T-Nut for 2020 Aluminum Profile - High-Strength End-Entry Nut (10x6mm)

Specifications

• Thread Size: M6 Metric (Standard 1.0mm Pitch).

• Installation Type: End-Entry (Slide-in).

• Material: Nickel or Zinc-Plated High-Carbon Steel.

• Dimensions: 10mm (L) x 6mm (W) x 4.5mm (H).

• Compatibility: European Standard 2020 Series Aluminium Profiles (6mm Slot).

• Clamping Type: High-Surface Contact Sliding Nut.

Key Applications & Projects

• Heavy-Duty CNC Machines: Mounting main gantry supports and spindle mounts.

• 3D Printer Frames: Securing heavy-duty base plates and vertical towers.

• Industrial Shelving: Building modular workshop storage with 2020 profiles.

• Motion Simulators: Providing high-strength pivot points for dynamic racing rigs.

Unlock New Capabilities (Project Evolution)

• Past Projects (Prerequisites): If you've been using M5 hardware, you may have reached the limits of clamping force for heavy vibration environments.

• Feature Upgrade: The M6 sliding nut unlocks Max-Load Engineering. It allows you to transition to M6 bolts—the highest standard thread for 20-series slots—providing significantly more torque than M5 counterparts.

• Effort/Requirements: Beginner. Requires sliding the nut into the profile end before closing the frame.

Virtual Technician & Installation

• Technician Note: Because M6 is the largest thread size for a 2020 slot, ensure your screw is perfectly perpendicular before tightening to avoid "binding" against the profile walls.

• Installation Guide:

  1. Count your M6 mounting points before final frame assembly.

  2. Slide the M6 T-nuts into the 6mm slot from an open end.

  3. Use a 4mm or 5mm Allen key (depending on your bolt head) to tighten.

  4. Once tightened, the sliding nut creates a friction-lock that prevents any lateral movement.

Accessories & Inclusion

• Included: 1 x M6 Sliding T-Nut.

• Required Additional: M6 Button Head or Socket Head Screws, 2020 Aluminium Profile, 4mm/5mm Allen Key.

Frequently Asked Questions (FAQ)

1. Will this fit a 2040 profile? Yes, it fits any 20-series profile with a 6mm slot.

2. Can I drop this in from the top? No, this is an end-entry nut; it must be slid in from an open end.

3. What is the thread pitch? Standard M6 x 1.0mm metric pitch.

4. Is it stronger than an M5 nut? Yes, the larger thread diameter allows for higher clamping torque.

5. How many pieces are in this pack? This listing is for a single (1) M6 T-nut.

6. Can I use this for 3030 profiles? No, 3030 profiles require larger 8mm slot nuts.

7. Is it made of aluminum? No, it is zinc/nickel-plated carbon steel for maximum strength.

8. Will it rust? The plating provides high resistance for indoor and enclosure use.

9. Is an Allen key included? No, you will need the appropriate hex key for your M6 screws.

10. Do I need to tap the profile? No, it slides directly into the T-slot.

11. Can I move it after the frame is built? Yes, slide it along the track by loosening the bolt.

12. What is the width of the nut? 6mm, matching the standard opening of 20-series profiles.

13. Is it compatible with V-slot? Yes, it works with both T-Slot and V-Slot.

14. What is the length? 10mm, ensuring a strong grip.

15. What is the maximum torque? It handles standard M6 torque specs (~9-10 Nm).

16. Is the thread centered? Yes, every nut is Lab Verified for centering.

17. What happens if I forget to slide it in? You would need to use a "Hammer Head" drop-in nut instead.

18. Can I use this for outdoor frames? Yes, provided the plating is intact.

19. What is the height? 4.5mm, designed to sit flush within the profile cavity.

20. Does Probots offer 10-packs? Yes, check our bulk hardware section for M6 10-packs.