UNI-T UT256 60A True RMS AC/DC Fork Meter - Compact Professional Tester

Specifications

• Maximum Current: 60A AC/DC

• Measurement Type: True RMS (TRMS)

• Jaw Type: Open-ended Fork Jaw

• Safety Rating: CAT III 600V

• Special Functions: NCV (Non-Contact Voltage), REL (Relative Mode), Data Hold, Backlight

• Compliance: CE Certified

Key Applications and Projects

• Control Panel Diagnostics: Measuring individual wire currents in high-density PLC and control cabinets where standard clamps are too large.

• HVAC Maintenance: Quickly verifying fan and compressor motor current draw in residential and commercial units.

• Electrical Troubleshooting: Rapidly identifying live circuits and checking continuity in domestic wiring projects.

Unlock New Capabilities (Project Evolution)

• Efficiency Upgrade: Replace time-consuming clamp measurements with the quick-slide fork jaw to speed up multi-point inspections in crowded panels.

• Safety Upgrade: Use the integrated NCV detector and professional CAT III 600V rating to verify safety before beginning any physical circuit work.

Downloads: 

• User_Manual

Package Includes:

• 1 x UNI-T UT256 Fork Meter

• 1 x Integrated Protective Jaw Cap

• 1 x Carrying Pouch

• 1 x Operating Manual

FREQUENTLY ASKED QUESTIONS (FAQ)

1. Can this meter measure DC current? Yes, the UT256 measures both AC and DC current up to 60A.

2. What is the benefit of a fork meter over a clamp meter? The open-ended fork jaw allows for much faster measurements in tight spaces where you cannot easily open a traditional clamp.

3. Does it have a backlight? Yes, it features a clear backlit LCD for working in dark environments.

4. Is it a True RMS meter? Yes, it uses True RMS to provide accurate measurements of non-linear AC signals.

5. How do I use the NCV feature? Move the tip of the fork jaw near a potential voltage source; the meter will signal if AC voltage is detected.

6. What is the "REL ZERO" button for? It allows you to zero out the display before DC measurements to account for environmental magnetic fields.

7. What batteries does it use? It typically requires 2x standard 1.5V AA batteries.

8. What is the maximum current capacity? It is rated for up to 60A AC or DC.

9. Can it measure voltage? No, the UT256 is a dedicated current-only fork meter; look for the UT256B if you require voltage test leads.

10. Is it safe for commercial electrical work? Yes, it carries a professional CAT III 600V safety rating.

11. How do I freeze a reading? Press the "HOLD" button to lock the current value on the screen.

12. What does the CE mark mean? It indicates the meter complies with European safety and environmental protection standards.

13. Is the jaw cap removable? Yes, the protective cap should be removed for measurements and replaced for storage.

14. Does it have a continuity buzzer? Yes, it provides audible feedback for quick wiring tests.

15. What is the update speed? The digital display updates approximately 2-3 times per second.

16. How thick is the meter? Its slim, pocket-sized design is significantly thinner than standard clamp meters.

17. Can I measure current in a bundle of wires? For an accurate reading, the fork should be slid over only one conductor at a time.

18. Does it have an auto-power off? Yes, it includes an auto-off feature to conserve battery life.

19. What color is the housing? It features the signature professional UNI-T red and black rugged housing.

20. Is this suitable for beginner DIYers? While easy to use, it is a professional-grade tool designed for safe use by qualified personnel.