β 20 min readShowdown: RS550 12V DC 8000 vs RS-555 12V DC 6000 RPM DC Motor
Vol. 56 | The Heavyweight DC Drivetrain Duel Reliability isn’t optional when you’re designing actuators that need to move actual steel or
Read Article β| Bulk Pricing | ||
|---|---|---|
| QTY | Unit Price(Inlc. GST) | |
| 10+ | βΉ48.00 βΉ 40.68 + 7.32 GST | |
| 20+ | βΉ47.00 βΉ 39.83 + 7.17 GST | |
| 30+ | βΉ45.00 βΉ 38.14 + 6.87 GST | |
| 50+ | βΉ42.50 βΉ 36.02 + 6.48 GST | |
High-quality 24-pin adapter board. Converts SOP24 and SSOP24 chips with a 1.0mm pitch to standard 2.54mm DIP24 pitch for breadboard prototyping.
YDLIDAR G2 Triangulation Series Distance Sensor Rangefinder 12M 360Β° UART βΉ12,849.00
YDLIDAR G4 Triangulation Series Distance Sensor Rangefinder 16M 360Β° UART βΉ29,899.00
YDLIDAR G6 Triangulation Series Distance Sensor Rangefinder 16M 360Β° UART βΉ33,999.00
YDLIDAR TSA 360Β° TOF Omnidirectional LIDAR Distance Sensor 8m UART βΉ10,499.00
YDLIDAR TG15 ToF Series Distance Sensor Rangefinder 15M 360Β° UART βΉ39,999.00 Bridge the gap between specialized SMD packages and standard prototyping. The SOP24/SSOP24 to DIP24 Adapter is an essential tool for developers working with ICs that utilize a 1.0mm lead pitch. While many standard adapters focus on 0.65mm or 1.27mm pitches, this board provides the necessary alignment for specific 24-pin packages, ensuring that your high-pin-count SMD logic gates or microcontrollers can be evaluated on standard solderless breadboards.
Probots™ ProSpec Grade Precision This adapter is Probots™ ProSpec Grade , featuring a high-quality FR-4 glass fiber substrate with precisely etched solder pads. A unique feature of this board is the inclusion of integrated 0805 component footprints for every pin. These allow you to solder pull-up resistors, decoupling capacitors, or LEDs in the 0805 package directly onto the board, creating a self-contained circuit module that saves space on your breadboard.
Board Length: 30.48mm
Board Width: 15.24mm
Material: High-quality FR-4 Glass Fiber
Input Pitch: 1.0mm
Passive Support: footprint for 24x 0805 SMD components (1 per pin)
DIP Output Pitch: Standard 2.54mm (0.1 inch)
Pin Count: 24 Pins
Self-Contained Logic Modules: Solder pull-up resistors to the integrated 0805 pads for clean signal processing.
Firmware Development: Break out 1.0mm pitch microcontrollers for easy wiring to an Arduino or ESP32.
Component Testing: Evaluate 24-pin SMD chips in traditional through-hole circuit designs.
Unlock New Capabilities (Project Evolution)
Feature Upgrade: The addition of dedicated GND pads on the corners allows for easy common grounding of your decoupling capacitors directly on the breakout board.
Effort Level: Intermediate. Requires basic SMD soldering techniques to mount the chip and the 2.54mm headers.
Package Includes:


What is the lead pitch for this board? This adapter features a specialized 1.0mm lead pitch.
Can I mount resistors on this board? Yes, it includes footprints for 24 separate 0805-sized SMD components.
Will this fit a standard breadboard? Yes, it converts the SMD pins to standard 2.54mm spacing for use with breadboards.
Are the header pins included? No, 2.54mm male header pins are sold separately.
What are the dimensions of the PCB? The board measures 30.48mm in length and 15.24mm in width.
Does it have corner ground pads? Yes, the board features specialized GND corner pads for easy module grounding.
What size are the passive component pads? They are designed for 0805-sized SMD resistors, capacitors, or LEDs.
Is the board material heat-resistant? Yes, the FR-4 material is rated for standard soldering temperatures.
How do I identify Pin 1? Pin 1 is indicated by a square pad on the silk screen.
Do I need a special iron for this? A fine-tip soldering iron is recommended for the 1.0mm pitch pads.
What is the row spacing for the DIP output? It is standard 0.6-inch (15.24mm) wide spacing.
Are the pads pre-tinned? Yes, the pads feature high-quality plating for easy solder wetting.
How many 0805 components can I fit? You can mount up to 24 components (one for each pin).
What is the diameter of the output holes? They are standard 1mm holes designed for 2.54mm pin headers.
Can I use this with a DIP socket? Yes, once headers are attached, it can be plugged into a standard 24-pin wide DIP socket.
Is it double-sided? Yes, it features traces and footprints on both sides to facilitate the conversion.
What color is the PCB? The board is standard green with white silk screening.
Can I reuse the board? Yes, if the component is desoldered carefully, the PCB can be reused.
What gauge wire fits the holes? Standard 22AWG solid wire or header pins are ideal.
Is this compatible with standard SSOP? Only if the chip has a 1.0mm pitch; most standard SSOPs are 0.65mm, so check your chip datasheet first.
Probots sells every Electronics Part for your next Project. You can order 10,000+ Electronic Parts Online - Arduino, Raspberry Pi, NodeMCU Development Boards, Sensors, Motors, Motor Drivers, SMPS, Plastic Enclosures etc in India directly on probots.co.in
We delivery electronics components and parts throughout India using standard couriers like Bluedart, Delhivery & India Post.
For order related queries contact -
This item is covered by a warranty of 7 days from the date of delivery, against confirmed manufacturing defects only, as verified by Probots' own testing and investigation. In case of a confirmed defect, we will replace the item β a refund is issued only if a replacement can't be supplied (e.g. discontinued or out of stock). Transit damage or a wrong item received must be reported within 3 days of delivery.
If the product shows signs of misuse, tampering, physical damage, static discharge, liquid or fire damage, use of unapproved chemicals, or has been soldered or physically altered in any way.
China
Probots sells every Electronics Part for your next Project. You can order 10,000+ Electronic Parts Online - Arduino, Raspberry Pi, NodeMCU Development Boards, Sensors, Motors, Motor Drivers, SMPS, Plastic Enclosures etc in India directly on probots.co.in
We offer specialized services for Bulk, Wholesale & B2B Customers like discounted prices, additional shipping options, customised products, etc . Customer with large quantity & regular orders qualify for the specialised discounted rates.
We also offer dedicated sales team to assist you with the order process by providing sales quotations, PI, technical support for choosing products, etc.
Note: Business Orders are processed manually and usually take 1-3 days to process compared to placing the order directly on our website. Please plan your purchases accordingly.
Need Help?
For bulk enquiries contact us by -
Probots Electronics is highly regarded for its highly skilled team and knowledgeable staff who provide expert guidance to ensure customers select the right components for their technical projects. The business maintains a strong reputation for prompt service and reliable support, with many clients praising their quick response times and genuine commitment to customer satisfaction.
β 20 min readVol. 56 | The Heavyweight DC Drivetrain Duel Reliability isn’t optional when you’re designing actuators that need to move actual steel or
Read Article β
β 13 min readWorkbench Vol. 49 π The Project Trifecta: 3 Builds to Start Today We don’t just stock parts; we curate ecosystems. This weekβs arrivals are desi
Read Article β
β 18 min readVol. 59 | The Battle of the Bite-Sized Boards Picture a project that needs full Linux, networking, and GPIOβbut has almost no room for a conventional
Read Article β