This Latching Metal Pushbutton is a perfect choice if you are in need of a heavy-duty push-button. These metal push buttons are very tough, small, panel-mount latching switches with an illuminated Green LED power symbol. It is an DPDT with 16mm threading. This button is perfect for basic On/Off functions. Overall length (including leads) is 1.5" and has small solder lugs for connection. These Latching buttons are rated up to 3A and 250VAC while the LED is rated for 5V.
Note: We can carefully manufacture this switch with the best quality contacts, springs and metal case. This is not a low-cost switch with false output ratings. Use only ProMax Industrial grade switches for the best quality and life.
The Indication LED has its own 2 Pins, it can be turned on by 5V Power and can be controlled independently from the switch. If you are controlling a 5V Load through the switch, you can connect the output of the switch to the LED pins and light up the LED only when the switch is on. The LED light can also be turned on from a 5V Signal from a Microcontroller, PLC, etc.
This is DPDT double pole switch. It has two poles, each with its individual C, NO and NC terminals. This allows you to control upto 2 devices or load wires independently. If you use a DPDT switch for input power or battery power input you can switch both the power wires using this switch for complete power isolation when the switch is off. You may also connect two different loads with a Double pole switch.
1x 16mm ProMax PPS16005BL-22F Metal Push Button Switch Waterproof Latching