ProMax 22mm Push Button Switch Socket Connector 5-pin Wire Harness for Metal Industrial Switches

Specifications:

• Compatibility: Standard 22mm Metal Push Button Switches (5-Pin).
  
• Pin Configuration: 5-Pin (NO, NC, C, LED+, LED-).
  
• Wire Length: ~150mm (15cm).
  
• Housing Material: High-temp resistant engineering plastic.
• Switch Operation type: Latching/Momentary.

Key Applications

• Industrial Control Panels: Create clean, modular wiring for machine start/stop stations.
  
• Custom PC Case Mods: Easily connect large 22mm illuminated power buttons without soldering near sensitive components.
  
• Home Automation Hubs: Professional-grade wall-mounted switches for lighting or security overrides.
  
• Arcade Cabinets: Reliable wiring for heavy-duty metal buttons that see high-frequency use.

Project Evolution

• Past Projects: If you have used standard 12mm or 16mm plastic buttons with flimsy breadboard jumpers, you know how unreliable they can be in permanent builds.
  
• Feature Upgrade: Upgrading to this 22mm Socket Connector allows you to build "Panel-Ready" projects. It unlocks the ability to swap out switches in seconds without a soldering iron—crucial for maintenance or changing LED colors.
  
• Effort Level: Beginner. No advanced tools required; just a screwdriver for your terminal blocks.

Virtual Technician & Wiring

⚠️ Safety Warning: Ensure your LED voltage matches your switch's rating (usually 12V or 24V) before connecting the LED+ and LED- wires to avoid burning out the internal resistor.

Typical 5-Pin Mapping:

• Red/Black: Usually assigned to LED Power (+ and -).
  
• White: Common (C)
• Blue: Normally Closed (NC).
• Green: Normally Open (NO)
• Note: Always verify the pin markings on the base of your ProMax switch before final assembly.

Package Includes:

1 X ProMax 22mm Push Button Switch Socket Connector 5-pin Wire Harness for Metal Industrial Switches

Frequently Asked Questions (FAQ)

1. Will this fit any 22mm switch?
   It fits most standard 5-pin 22mm metal switches, specifically the ProMax PPS series.
2. Do I need to solder the wires to the socket?
   No, the socket comes pre-wired.
3. What is the current rating of the wires?
   The wires are rated for up to 5A at 250VAC.
4. Is the connector waterproof?
   While the switch might be, the socket is not. Use heat shrink for external use.
5. Can I use this with a 3-pin switch?
   No, this is specifically keyed for 5-pin configurations.
6. What is the length of the pigtail wires?
   Approximately 15cm.
7. How do I identify the NO and NC wires?
   Refer to the switch base markings; the socket passes these pins through directly.
8. Is the plastic housing flame retardant?
   Yes, it is made of high-temp UL-rated plastic.
9. Can I remove the pins from the socket?
   They are crimped and locked; removal is not recommended.
10. What is the wire gauge?
    Typically 20 AWG.
11. Does it work with 12V LEDs?
    Yes, it passes whatever voltage you supply to the LED pins.
12. Is this compatible with 16mm switches?
    No, 16mm switches use a smaller socket.
13. Can I use this for 110V/220V AC?
    Yes, as long as the switch is rated for it.
14. How do I lock the socket to the switch?
    It is a friction-fit "snap" design that holds firmly.
15. Are the wires color-coded?
    Yes, for easy identification during installation.
16. Can I use this for momentary switches?
    Yes, it works for both momentary and latching 5-pin switches.
17. What happens if I wire the LED backward?
    Most LEDs won't light up but won't be damaged at low voltages (check switch datasheet).
18. Is this sold as a pair?
    No, this SKU is for one 5-pin socket connector.
19. Does it include the switch?
    No, this is the socket accessory only.
20. Can I use this for automotive 12V projects?
    Yes, it is ideal for car dash modifications