Multifunction Programmable Timer with Relay Output Module Switch

This is an industrial grade multifuntional timer. Timer can be triggered by an input signal and offers advanced options like setting on time, off time, looping, single shot, reset on second input during on time, etc

The timer offers multiple operating modes(P0 to P9) and user can select them as required. Complex timer functions with different on/off times, looping/restarting/ignoring of multiple trigger signals, can be programmed.

All the programming happens onboard using the Display and Keypad. The module can be programmed over UART too.

Stuiable for industrial environments the timer comes with panel mounting.

The timer includes an onboard relay to directly control DC and AC Loads (max 5A). For higher loads, it is safe to connect a high power relay/contactor in between.

Multifuntional Timer Demo with Detailed Operating Instructions

Product Highlights:

• LCD Display with two columns. Users can display and change parameters directly;
• Trigger mode: timer can be trigger by both high and low level signals
• Power supply: 6~30V.
• Parameters can be modified via UART.
• Stop button to provide emergency stop function.
• Timer Display enters Sleep mode in 5 minutes when no activity is detection. Auto wake up on detection of input.
• OP/CL/LOP params can be modified individually
• All parameters are automatically saved after power off

Specifications:

• Trigger signal source: Accepts both High level(3.0V~24.0V) & Low level(0.0V ~0.2V) signal for trigerring
• Maxmum Output load DC 30V 10A and AC 220V 5A
• Max time period: 9999 seconds
• Min time period: 0.01 seconds
• Operating Current: 15mA
• Relay Operating current: 50mA.
• Service life more than 100,000 cycles
• working temperature -40-85°C

Working Mode Introduction(P1~P7)

The timer can work in the following modes  (OP, CL and LOP can be adjusted by the user)-

• P0: On receiving the trigger signal, the relay turns on for OP time then disconnects; during OP time, fresh trigger signals are ignored.
• P1: On receiving the trigger signal, the relay turns on for OP time then disconnects; during OP time, fresh trigger signal are starts new timer.
• P2: On receiving the trigger signal, the relay turns on for OP time then disconnects; during OP time, fresh trigger signal resets timer, relayis disconnected and timing is stoped
• P3: On receiving the trigger signal, the relay turns off for CL time then turns on
• P4: After the signal is triggered, the relay conduction the OP time, and then the relay disconnects the CL time, and then loops the above action, gives the signal again in the loop, relays disconnect, stops the timer; and the number of cycles (LOP) can be set; End of cycle, keep relay disconnected;
• P5: After the signal is triggered, the relay disconnects the CL time , and then the relay conduction the OP time, and then loops the above action, gives the signal again in the loop, relays conduction, stops the timer; and the number of cycles (LOP) can be set; End of cycle, keep relay conduction;
  P6: No trigger signal after power-on, After the relay conduction OP time, the relay disconnects the CL time, and then loops the above action, signal is invalid in the loop, the number of cycles (LOP) can be set; End of cycle, keep relay disconnected;
• P6: No trigger signal after power-on, After the relay disconnects the CL time, the relay conduction OP time, and then loops the above action, signal is invalid in the loop, the number of cycles (LOP) can be set; End of cycle, keep relay conduction;
• P8: Signal hold function: The signal is maintained, the timing is cleared, and the relay conduction; when the signal disappears, the relay disconnects after the timing OP; during the timing, there is another signal and the timing is cleared
• P9: Signal hold function: The signal is maintained, the timing is cleared, and the relay disconnected; when the signal disappears, the relay conduction after the timing CL; during the timing, there is another signal and the timing is cleared;
  (P0~P7) mode, short press the pause button, Start timing if the system is not timed; If the system is already timed, the system pauses the timer, the relay disconnected, flashing "out" to indicate a reminder;
  P8/P9 mode, The pause button as a trigger signal in the Run interface, Short / Long press fail;

Package Includes

• 1 x Multifunction Programmable Timer with Relay Output Module Switch