1M Flexible EL Wire Neon Light Strip - Green (Waterproof, Cuttable)

Specifications:

• Operating Voltage: ~3V
• Input Requirement: Requires DC-to-AC Inverter (Sold Separately)
• Length: 1 Meters
• Color: Green 
• Diameter: 2.3mm
• Operating Temperature: -10°C to +60°C

Key Applications & Projects

• Cosplay Masks: Highlighting eyes or facial contours on masks 
• Helmet Mods: Adding a "halo" effect to motorcycle or cycling helmets.
• Controller Mods: Lining the seams of an Xbox/PS5 controller.
• Scale Models: Simulating fluorescent tube lighting in architectural dioramas.
• Drone Racing: Distinct team color identifiers for night flying.

Project Evolution 

• Past Projects (The Prerequisite): You may have used 3mm LEDs for eyes in a mask, but they create blinding hotspots and require complex wiring looms.
• Feature Upgrade (The Unlock): This 1M EL Wire allows for Contour Lighting. You can outline shapes rather than just illuminating points. It diffuses light softly, preventing glare in your vision when worn near the eyes.
• Effort Level: Beginner.
• Minimum Hardware: 1M EL Wire + 2xAA Inverter.

Virtual Technician & Wiring ⚠️

• ⚠️ CRITICAL POWER WARNING: EL Wire CANNOT be powered directly by a DC battery. It requires an EL Inverter. Plugging this directly into a battery will damage the wire.
• ⚡ Cutting Safety: You can cut the wire to fit your mask exactly! After cutting, place a drop of superglue or hot glue on the cut end to seal it electrically.
• Wiring: The JST-SM connector is keyed. It only fits one way. Do not force it.

Package Includes: 

1 X 1M Flexible EL Wire Neon Light Strip - Green (Waterproof, Cuttable)

Frequently Asked Questions (FAQ)

1. Does this 1M wire come with a battery pack?
   No, this is the wire only. You must buy a driver/inverter separately.

2. Is 1 Meter long enough for a mask?
   Yes, 1M is usually enough to outline the eyes and jawline of a standard face mask.

3. Can I power this with a coin cell battery?
   Yes! We sell "Coin Cell Inverters" which are tiny and perfect for hiding inside a helmet.

4. Is Green the brightest color?
   Yes. The human eye is most sensitive to green light, so Green EL wire generally appears brighter than Red, Blue, or Purple EL wire.

5. Can I cut it to 50cm?
   Yes. You can cut it anywhere. The leftover 50cm can be used if you solder a new connector to it.

6. Does it get hot against my face?
   No. EL wire is a "cold light" source and is safe to wear directly against skin.

7. Is it waterproof?
   The wire is waterproof, but the connector is not. If using it on rain gear, wrap the connection in electrical tape.

8. Can I bend it into sharp corners?
   Yes, it is very flexible. Avoid repeatedly bending it back and forth at the same spot to prevent metal fatigue.

9. What is the diameter?
   It is 2.3mm thick.

10. Why does the inverter make a noise?
    The inverter vibrates at high frequency to generate the AC voltage. This faint whine is normal.

11. Can I use a 5M inverter for this 1M wire?
    Yes, but the wire might glow too brightly and shorten its lifespan slightly because the inverter is overpowering it. A smaller inverter is better.

12. Does it look blueish?
    Our White EL wire is a cool white. When unlit, the outer jacket may appear slightly pink or peach-colored; this is normal for the phosphor chemistry to produce white light when lit.

13. How do I attach it to a helmet?
    Use clear superglue (Cyanoacrylate) or clear double-sided tape.

14. Can I connect two 1M wires to one inverter?
    Yes, if you use a "2-way splitter cable" and the inverter is strong enough (e.g., a 2xAA inverter).

15. Is it safe for kids?
    Yes, provided the battery pack is secured. The voltage is high but the current is very low and non-lethal.

16. Does it fade over time?
    EL wire slowly dims over its life (12,000 hours).

17. Can I run it from USB?
    Yes, use our USB EL Inverter.

18. Is the light solid or dotted?
    It is a solid, continuous line of light.

19. Can I sew it?
    Yes, you can stitch over it with clear fishing line. Do not pierce the wire itself.

20. What happens if I pierce the wire?
    You will break the internal circuit and the wire will stop glowing from that point onwards.