Industrial-Grade 120mm Copper Tube Condenser Radiator & 220V AC Fan Assembly

Quick Introduction: Need to dissipate serious heat? Standard PC radiators won't cut it for industrial applications. This Industrial-Grade 120mm Condenser Assembly combines the superior thermal conductivity of pure copper tubing with a high-static-pressure 220V AC Fan. Designed for heavy-duty thermal management, it is the perfect solution for cooling Peltier modules, CO2 laser tubes, and industrial control cabinets where reliability is paramount.

Detailed Specifications

• Radiator Construction: 4 Rows of Copper Tubing (10mm OD) with Hydrophilic Blue Aluminium Fins.

• Fan Specs: 120mm x 120mm x 38mm, 220V-240V AC, 0.14A, 3000 RPM.

• Cooling Method: Forced Convection (Air-to-Water Heat Exchanger).

• Dimensions: 145mm (L) x 90mm (W) x 50mm (H) [Condenser Body].

• Tubing Connection: Straight copper ports, fits 8mm - 10mm ID tubing.

• Fin Coating: Hydrophilic Aluminium (Blue) for improved condensation drainage and corrosion resistance.

Quality Advantage & Differentiation: Unlike cheap all-aluminium PC radiators, this unit uses Copper Tubing for the fluid path. Copper offers significantly better thermal transfer properties than aluminium and is compatible with industrial coolants. The Hydrophilic Blue Fin Coating prevents water bridging between fins, ensuring maximum airflow and efficiency even in humid environments. The included 220V AC Fan runs directly off mains power, eliminating the need for bulky 12V power supplies in industrial setups.

Key Applications & Usage

• Peltier/TEC Cooling: Efficiently removes waste heat from the hot side of thermoelectric coolers.

• Laser Systems: Cools water loops for small CO2 laser engravers.

• Cabinet Cooling: Acts as a compact evaporator or condenser for small enclosure air conditioners.

• DIY Refrigeration: Can be used as a condenser in miniature compressor-based cooling loops.

What's Included & Required

• Included: 1x Copper Tube Condenser Radiator, 1x 220V AC Fan (Mounted).

• Required: 8mm or 10mm ID Water Tubing, Water Pump, Hose Clamps, AC Power Cord (for fan).

The "Virtual Technician" Support Panel

• ⚠️ CRITICAL SAFETY WARNING:

  1. High Voltage Hazard: The fan runs on 220V AC Mains Power. It is NOT 12V DC. Improper wiring can cause electrocution or fire. Ensure connections are insulated with heat shrink or a proper junction box.

  2. Galvanic Corrosion: This radiator has Copper tubes. If you are mixing it with aluminium water blocks in the same loop, you MUST use a corrosion inhibitor coolant (automotive antifreeze or PC water cooling fluid) to prevent galvanic corrosion.

  3. Pressure: Standard soldered copper joints. Do not exceed 50 PSI (3.5 Bar) water pressure.

• Pinout Reference (Fan):

  • 2 Wires: No Polarity. Connect one wire to Live (L) and the other to Neutral (N) of your 220V AC supply.

  • Note: Fan usually comes with bare wire leads; you will need to solder or crimp a plug.

• Troubleshooting: Fan loud or vibrating? Check the mounting screws. Industrial AC fans move a lot of air (3000 RPM) and are naturally louder (50dB) than silent PC fans. This is normal for high-performance cooling.

Call to Action (CTA) Build your cooling system with industrial reliability. Add the 120mm Copper Condenser & 220V Fan Assembly to your cart and keep your temperatures under control.