XT60H-F Female Connector for LiPo Battery ESC Brushless Motor

Specifications

• Model: XT60H-F (Female)
• Housing Material: High-temp Nylon (UL94V-0 Rated)
• Contact Material: Gold-plated Brass
• Continuous Current: 30A
• Peak Current: 60A
• Rated Voltage: 500V DC
• Temperature Range: -20°C to 120°C
• Wire Compatibility: Up to 12AWG
• Mechanical Durability: 1000 Cycles
• Number of pins: 2
• Colour: yellow

Applications

• FPV Racing Drones: The standard battery-to-ESC interface for 3S to 6S builds.
• Robotics: Ideal for heavy-duty drive motors in combat robots or AMR platforms.
• Electric Vehicles: Reliable power coupling for small E-scooters and DIY battery enclosures.
• Bench Power Supplies: Create high-current breakout cables for your lab station.

Project Evolution

• Past Projects: If you’ve mastered basic Arduino projects using 2.1mm DC barrel jacks but found them getting hot or failing under motor loads...
• Feature Upgrade: This XT60H-F unlocks true high-current potential. It moves you from "signal-level" power to "industrial-level" power, allowing you to drive high-KV brushless motors without bottlenecking your battery's C-rating.
• Effort/Requirements: Intermediate soldering skills required. You will need a high-wattage soldering iron (60W+) to properly heat the large 12AWG solder buckets.

Virtual Technician & Wiring

• ⚠️ Safety Warning: Always solder the Female (F) connector to the Battery side. This prevents accidental short circuits if the connector touches a metal surface, as the pins are recessed.
• Pin Mapping: The flat side of the "D" shape is the Positive (+) terminal, and the angled side is the Negative (-) terminal.
• Housing Install: Solder your wires first, then snap the included rear housing over the solder joints. No heat shrink is strictly required with the "H" version, though it is still recommended for maximum insulation.

Package Includes:

• 1 x XT60H-F Female Connector

Frequently Asked Questions (FAQ)

• What does the 'H' in XT60H stand for?
  It stands for "Housing," referring to the snap-on rear cap that protects solder joints.
• Is XT60H compatible with standard XT60?
  Yes, they are 100% cross-compatible.
• Can I use 10AWG wire with this?
  It is optimized for 12AWG, but 10AWG can fit with careful soldering.
• Is this connector waterproof?
  No, it is a friction-fit connector and is not IP-rated for water immersion.
• Why use Female on the battery side?
  To prevent the exposed pins of a Male connector from shorting out against other objects.
• What is the maximum voltage for XT60H?
  It is rated up to 500V DC.
• Are these genuine Amass?
  Yes, these feature the Amass branding and high-temp nylon construction.
• Do I need heat shrink for the XT60H?
  The snap-on housing covers the joints, but heat shrink adds extra strain relief.
• How much heat can the nylon body take?
  It is rated for up to 120°C.
• What is the contact resistance?
  Approximately 0.50mΩ.
• Can I use this for AC power?
  No, XT60 connectors are strictly designed for DC applications.
• What solder should I use?
  60/40 Lead-Tin or Lead-free solder with a good flux core.
• How do I clean the contacts?
  Use Isopropyl Alcohol (IPA) if they become dirty.
• Is the housing removable after snapping?
  It is difficult to remove without damage once fully clicked into place.
• What is the weight of one connector?
  Approximately 2.5 grams (without housing) to 3.5 grams (with housing).
• Will it melt if I take too long to solder?
  Amass Nylon is resistant, but you should still complete soldering within 3-5 seconds.
• Can I use this for a 3D printer bed?
  Yes, it is a popular upgrade for heated bed power lines.
• Does color affect performance?
  No, Yellow is the standard, though Black is sometimes available.
• What is the flammability rating?
  UL94V-0 (Self-extinguishing).
• How many mating cycles is it rated for?
  1000 cycles.