Raspberry Pi 3 Camera Module V2 Board 8MP 1080p

Specifications

• Sensor: Sony IMX219 (8-megapixel)
• Still Image Resolution: 3280 x 2464 pixels
• Video Modes: 1080p30, 720p60, 640x480p60/90
• Sensor Size: 1/4" Format
• Pixel Size: 1.12 µm x 1.12 µm
• Lens: Fixed focus (adjustable if glue is carefully removed)
• Horizontal Field of View (FOV): 62.2 degrees
• Vertical Field of View (FOV): 48.8 degrees
• Interface: 15-pin MIPI CSI (Camera Serial Interface)

Applications

• Security & Surveillance: Clear 1080p video for facial recognition and motion logging.
• Computer Vision: High-speed 90fps modes are ideal for OpenCV-based line following or object tracking.
• Time-lapse Photography: Capture stunning, high-res scenery over hours or days.
  Smart Agriculture: Monitor plant health with high color accuracy.

Unlock New Capabilities

• If you've mastered the basic USB webcams on Raspberry Pi, you know they can be bulky and laggy.
• The Upgrade: Moving to the CSI-based Camera V2 unlocks direct GPU access, drastically reducing CPU overhead and latency. It allows for high-speed frame capture (up to 90fps) that USB cameras simply cannot match.
• Effort Level: Beginner/Intermediate. Requires basic terminal knowledge to enable the camera interface.
• Minimum Hardware: Raspberry Pi (Model 1B to 5), 15-pin CSI cable (included), and a stable 5V power supply.

Virtual Technician & Wiring

• ⚠️ Safety Warning: Always turn off your Raspberry Pi before connecting or disconnecting the camera module. Static electricity or a shorted flex cable can permanently damage the CSI port.
• Pin Mapping (CSI Interface): The camera uses a 15-pin ribbon cable. Ensure the blue side of the cable faces the Ethernet/USB ports on Pi 3 models (contacts face the HDMI port).
• +3.3V: Power input
• DGND: Digital Ground
• MIPI Lanes (D0, D1, CLK): High-speed pixel data transmission
• I2C (SDA, SCL): Camera control and configuration

Package Includes:

• 1 x Raspberry Pi 3 Camera Module V2 Board 8MP 1080p

Frequently Asked Questions (FAQ)

• Is this compatible with the Raspberry Pi 4?
  Yes, it is fully compatible with all models of Raspberry Pi 4 Model B.
• Does it work with the Raspberry Pi Zero?
  Yes, but you will need a specific "Pi Zero Camera Cable" (smaller connector) which is sold separately.
• How do I enable the camera on the latest OS (Bookworm)?
  On the latest OS, the camera is auto-detected. Use the command libcamera-hello to test the feed.
• Can I adjust the focus?
  Yes, though it comes as a fixed-focus lens, you can use a lens tool to break the tiny glue dots and adjust it for macro shots.
• Does it capture infrared (night vision)?
  This is the standard V2 with an IR filter. For night vision, you should purchase the Pi NoIR V2 variant.
• What is the maximum video frame rate?
  It supports up to 90fps at 640x480 resolution.
• Can I use a longer cable?
  Yes, CSI cables up to 1-2 meters are available, but signal quality may degrade over very long distances.
• Does it support the Raspberry Pi 5?
  Yes, but the Pi 5 requires a special 22-pin to 15-pin FPC camera cable.
• Is a cable included?
  Yes, a standard 15cm flex cable for Pi 3/4 is included in the box.
• Does it have a built-in microphone?
  No, this module captures video and stills only. Use a USB mic for audio.
• How do I fix the "No data received from sensor" error?
  Check that the tiny "SUNNY" connector on the camera PCB is firmly pressed down.
• What sensor does the V2 use?
  It uses the Sony IMX219 8-megapixel sensor.
• Can I use this for facial recognition?
  Yes, it is highly recommended for OpenCV and TensorFlow Lite projects.
• Is it compatible with Python?
  Yes, it is primarily used with the picamera2 or libcamera Python libraries.
• What is the field of view (FOV)?
  The horizontal FOV is approximately 62 degrees.
• How much power does it consume?
  It draws approximately 250mA during active video encoding.
• Can I use two cameras at once?
  Only on the Compute Module or Pi 5, which feature dual CSI ports.
• Is this the original Raspberry Pi camera?
  Yes, this is the official Version 2 module.
• How do I take a high-res photo via terminal?
  Use the command libcamera-still -o image.jpg.
• Does it get hot during use?
  The sensor can become warm during extended 1080p recording; ensure adequate airflow.