ProMax DPOX180H Handheld 2-in-1 Digital Phosphor Oscilloscope and Signal Generator Dual Channel

Features:

• Handheld 2in1 dual channel oscilloscope and signal generator. As an oscilloscope, it has 180MHz-3DB analog bandwidth and a 500MSPS real-time sampling rate. Built-in 20MHz DDS function signal generator with 14 kinds of standard function signals,
• 2.8-inch IPS display with clear definition, color temperature display, and multi-level grayscale display capability
  50,000wfms/s Waveform Refresh Rate
• Complete trigger function, automatic, single, regular three trigger modes; rising-edge trigger mode, falling-edge trigger mode.
  Adapts high-frequency, low-frequency, and high-noise signals for cleaning stable waveforms.
• Large Time Base Scrolling Mode In scroll mode, slow-level changes can be monitored in real-time.
• ZOOM Scaling Time Base Provide an additional amplification time base. It can provide a 2~1000 times amplification view effect in a running or pause state.
• Digital Fluorescence X Y Mode Support digital fluorescence technology, dual-channel generates a closed curve graph that can be used to compare the amplitude, frequency, and phase of two groups of signals.
  5mV High Sensitivity Ultra-high Waveform Signal-to-Noise Ratio The analog front-end uses outstanding shielding measures and a stable feedback system.
• The analog front end has a built-in switchable 20MHz hardware bandwidth limiting component, and the -3DB attenuation bandwidth is 20MHz when turned on.
• Intercept part or all of the various signals measured by the oscilloscope to be used as the output signal of the signal generator, up to 500 custom signals can be stored.
• 400V High-voltage Burn-in Protections
• Built-in 3000mah high-capacity rechargeable lithium battery
• Built-in 120Mbit storage space, up to 250 sets of waveforms and 90 screenshots can be stored, you can view full-screen imagings and secondary analysis of the stored waveform data.
• Equipped with an efficient one-key auto adjustment function, signal measurement is easy and fast; cursor accurate measurement of waveform parameters.

Applications:

• Generic R&D, Testing, Debugging, Analog Signal Monitoring, Waveform
• Monitoring, etc
• Suitable for debugging noise, signal frequencies, wavelengths, duty
• cycles, power supplies, etc
• Electronic DIY Applications
• Equipment debug
• Scientific research
• Product development

Specifications:

• Number of channels: 2
  
• Analog bandwidth: 180MHz
  
• Maximum sampling rate: 500MSPS
  
• Input coupling: DC/AC
  
• Rise time: 2.5nS
  
• Storage depth: 120Kpts
  
• Input impedance: 1MQ-18PF
  
• Vertical sensitivity: 5mV~10V(1X)
  
• Time base range: 5nS~50S
  
• DCAccuracy: ±2%
  
• Time accuracy: +0.01%
  
• Trigger architecture: digital trigger
  
• Trigger mode: auto/single/regular
  
• Trigger edges: rising/falling
  
• Test range: 40mV~80V(1X)
  
• Screen storage: 90 sheets
  
• Interceptwave signal: 500
  
• Interceptwave outputter: Support
  
• 20M hardware bandwidth limit: support
  
• Cursor measurement: frequency/period/amplitude
  
• ZOOM scaling time base: support
  
• Adjustable Automatic Bandwidth Limiting: Support
  
• Scrolling mode: support
  
• X-Y mode: Support
  
• Auto-adjustment: Support
  
• Waveform manager: support
  
• High voltage anti-burning: all gears withstand voltage 400V
  
• Screen size: 2.8 inch
  
• Screen resolution: 320 * 240
  
• Screen display process: IPS full-view
  
• Expansion interface: USB transmission interface
  
• Auto shutdown: 5 minutes to 2 hours
  
• Firmware upgrade: support iso imaging upgrade
  
• Charging requirements: 5V-2A
  
• Battery capacity: 3000mah
  
• Parameter measurement: 12 kinds
  
• Signal generator: 14 kinds of standard function signal
  
• Waveform storage: 250 groups
  
• Dimensions(L*W*H): 135 * 90 * 40mm 
  
• weight: 680g