This is a low cost mini submersible type water pump that works on 3-6V DC. It is extremely simple and easy to use. This Pump has one inlet valve and one outet valve. Connect the inlet valve to your water source and outlet valve to your desired location and power the motor with 3-6V to start pumping water.

Great for building science projects, fire-extinguishers, fire fighting robots, fountains, waterfalls, plant watering systems etc.

This motor is small, compact and light. It can be controlled from a micro controller/Arduino using our DC Motor Drivers or one of our Relay Boards. You may use our 5V SMPS Power Supply Adapter to run this pump. You may also use our 6V Solar Panel to run the pump with an appropriate 6V voltage regulator.

This pump can be used under submersible and non submersible conditions.

Features

Operating DC Voltage: 2.5-6V
Maximum Water lift height: 40-110cm / 15.75"-43.4"
Flow rate: 80-120L/H
Outer Diameter of Water Outlet: 7.5mm / 0.3"
Inside Diameter of Water Outlet: 5mm / 0.2"
Pump Diameter: Approx. 24mm / 0.95"
Pump Length: Approx. 45mm / 1.8"
Pump Height: Approx. 30mm / 1.2"
Wire Length: ~13mm cm

Applications

Great for building science projects, fire-extinguishers, fire fighting robots, fountains, waterfalls, plant watering systems etc.
Controlled fountain water flow
Controlled Garden watering systems
Hydroponic Systems
Freshwater intake or exhaust systems for fish aquariums