Arduino Lilypad for eTextiles & Wearables Atmega328

₹549.00 Rs. 465.25 + 83.75 GST
In stock. 1-7 Day Delivery in India.

The LilyPad Arduino is designed for e-textiles and wearables projects. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread!

The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package designed to minimize snagging and profile, with wide tabs that can be sewn down and connected with conductive thread. The LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 3V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch). The LilyPad Arduino Main Board is a small sewable computer. It can be stitched to fabric and connected to other electronic pieces with conductive thread. This LilyPad board has 22 pins — the silver petal-like tabs that ring the outside of the board — twice as many as any other LilyPad Arduino. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch). This board is based on the ATmega328V microcontroller. The microcontroller is the black square in the center of the board (top view). You can program this LilyPad board using the Arduino programming environment. See the LilyPad Arduino getting started guide for instructions on setting up your board and writing programs. See the LilyPad Arduino E-Sewing tutorial for instructions on attaching your board to fabric.


  • Total pins 22
  • Digital IO pins 20
  • Analog input pins 6
  • PWM pins 6
  • Power board requires 2.7-5.5 Volts. Sew an appropriate power supply to the (+) and (-) pins
  • 50mm outer diameter
  • Thin 0.8mm PCB
  • Microcontroller : ATmega168V or ATmega328V.
  • Operating Voltage: 2.7-5.5 V.
  • Input Voltage : 2.7-5.5 V.
  • Digital I/O Pins : 14 (of which 6 provide PWM output).
  • Analog Input Pins: 6.
  • DC Current per I/O Pin: 40 mA.
  • Flash Memory: 16 KB (of which 2 KB used by bootloader).
  • SRAM : 1 KB.
  • EEPRO : 512 bytes.
  • Clock Speed: 8 MHz.
*Note: The reference to Arduino refers to the Arduino project, an open source computing platform. This is not the original Arduino board. It is only an Arduino Compatible product.

Write Your Own Review
You're reviewing:Arduino Lilypad for eTextiles & Wearables Atmega328
Your Rating