iFlight 10x100mm Microfiber RC Battery Strap - Black with Metal Ring

Specifications

• Brand: iFlight

• Total Length: 100mm

• Strap Width: 10mm

• Material: Microfiber / Synthetic Leather backing with Velcro closure

• Hardware: Metal Loop Ring

• Colour: Black with White Stitching

Key Applications and Projects

• Micro FPV Drones: Securing lightweight 1S, 2S, or 3S LiPo batteries to the bottom or top plates of sub-250g micro quadcopters.

• RC Cars and Crawlers: Tying down small receiver packs or securing loose wiring bundles against the chassis of 1/24 scale RC crawlers.

• General Cable Management: Acting as a premium, reusable cable tie for organising USB cords, charging leads, or workbench wires.

Unlock New Capabilities (Project Evolution)

• The Ejection-Proof Setup: While this strap is incredibly strong, hard crashes can still cause a battery to slide out from underneath it. Evolve your drone build by pairing this strap with a Sticky Silicone Battery Pad. Sticking a silicone pad to your carbon fibre frame creates immense friction against the battery casing. When you cinch the iFlight strap tightly over the top, your battery becomes virtually immovable, completely eliminating mid-air ejections!

Package Includes: 

• 1 x iFlight Microfiber Battery Secure Strap (10x100mm, Black)

FREQUENTLY ASKED QUESTIONS (FAQ)

1. What are the exact dimensions of this strap? It is exactly 100mm long and 10mm wide.

2. What material is it made of? The strap is made from a durable microfiber/synthetic leather material with a velcro hook-and-loop closure system.

3. Is the loop ring made of metal or plastic? It features a highly durable metal loop ring for maximum cinching strength.

4. What size drones is this strap meant for? Because it is only 100mm long, it is specifically designed for micro drones, toothpick frames, and tiny whoops.

5. Will this fit a standard 4S or 6S battery for a 5-inch racing drone? No, 100mm is far too short to wrap around a large 4S or 6S battery. You will need a 200mm or 250mm strap for larger drones.

6. Does the strap stretch like a rubber band? No, the microfiber material is non-elastic. This is intentional, as a stretching strap would allow the battery to slip out during flight.

7. How do I fasten it? Slide the velcro end through the metal ring, pull it back tightly over itself, and press the hook and loop surfaces together to lock it.

8. What color is the stitching on the edges? The strap features highly visible white perimeter stitching against the black material.

9. What text is printed on the strap? It features the "iFLIGHT" logo along with the motto "Flight Beyond Vision".

10. Is the velcro strong enough to survive crashes? Yes, the industrial-grade hook-and-loop fastener is designed specifically to withstand the high impacts associated with FPV drone racing.

11. Can I cut the strap to make it shorter? It is highly discouraged. Cutting it will remove the velcro hook section at the tip, rendering the strap useless, and the stitching will fray.

12. Can I use this for cable management? Absolutely. They make excellent, premium-looking reusable cable ties for organizing wires on your workbench or inside a PC case.

13. Is it rubberized on the side that touches the battery? This specific model utilizes the smooth microfiber texture; it is highly recommended to use a sticky silicone battery pad on your drone frame for maximum grip.

14. How much does it weigh? Being a micro strap, it is extremely lightweight (typically around 1 to 2 grams), adding virtually zero weight to your sub-250g build.

15. Will the metal ring scratch my battery? Typically, the fabric of the strap sits between the metal ring and the battery casing, preventing direct rubbing and scratching.

16. Can I daisy-chain two of these together? Yes, you can loop one strap through the metal ring of another to effectively double the length if you are in a pinch.

17. How do I clean the strap if it gets muddy? You can wipe it down with a damp cloth. Avoid harsh chemicals that might degrade the synthetic leather or the velcro adhesive.

18. Is the metal ring welded closed? Yes, it is a continuous, solid metal D-ring that will not bend open under tension.

19. What size LiPo batteries will this fit? It is ideal for small, rectangular 1S, 2S, and low-capacity 3S LiPo batteries commonly used in micro RC vehicles.

20. Why should I choose this over a generic zip tie? Zip ties are single-use, require tools to remove, and their sharp plastic edges can easily cut into the soft foil pouch of a LiPo battery and cause a dangerous fire. This strap is reusable, soft, and safe.