● 17 min readShowdown: Uno R4 vs Uno R3 vs Nano
Welcome to Vol. 12 of The Probots Showdown. Three boards. Three price points. Three very different futures for your project.Should you stick with the
Read Article →| Bulk Pricing | ||
|---|---|---|
| QTY | Unit Price(Inlc. GST) | |
| 5+ | ₹632.61 ₹ 536.11 + 96.5 GST | |
| 10+ | ₹626.22 ₹ 530.69 + 95.52 GST | |
| 20+ | ₹607.05 ₹ 514.45 + 92.6 GST | |
| 50+ | ₹587.88 ₹ 498.2 + 89.68 GST | |
Description:
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on theWiznet W5500 ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. The Ethernet W5500 Shield Network Expansion Board w/ Micro SD Card Slot supports up to four simultaneous socket connections.
Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.
The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO board. This Ethernet Shield connects the UNO R3 board to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet. allows you to connect your Arduino UNO 328 or MEGA 2650 1280 to a network or the internet AND retrieve or store files on a Micro SD Card!
The Ethernet Shield has a standard RJ-45 connection, with an integrated line transformer and Power over Ethernet enabled. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Uno and Mega (using the Ethernet library). The onboard micro SD card reader is accessible through the SD Library. When working with this library, SS is on Pin 4. The original revision of the shield contained a full-size SD card slot; this is not supported.
The shield also includes a reset controller, to ensure that the W5500 Ethernet module is properly reset on power-up. Previous revisions of the shield were not compatible with the Mega and need to be manually reset after power-up.
This module is compatible with following Arduino Uno and Mega
Features :
Based on the W5500Based on the Wiznet W5500 allows an Arduino board to connect to the internet.
Stackable Design, can directly be supported by for Arduino official Ethernet Library.
Supports up to four simultaneous socket connections
Can be used to store files for serving over the network.
Compatible with the for Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560).
Can be accessed using the Mini SD TF library.
The current shield has a Power over Ethernet (PoE) module designed to extract power from a conventional twisted pair Category 5 Ethernet cable.
IEEE802.3af compliant
Low output ripple and noise (100mVpp)
Overload and short-circuit protection
1500V isolation (input to output)
Package Includes :
1 x Ethernet Shield for Arduino UNO MEGA W5500 upgraded W5100 for IoT
Additional information
IC Chip-Wiznet : W5500
Connection speed: 10/100Mb
Operating Voltage (VDC): 5
Length (mm): 75
Width (mm): 54
Height (mm): 25
Weight (gm): 78
* Product Images are shown for illustrative purposes only and may differ from actual product.
Probots sells every Electronics Part for your next Project. You can order 10,000+ Electronic Parts Online - Arduino, Raspberry Pi, NodeMCU Development Boards, Sensors, Motors, Motor Drivers, SMPS, Plastic Enclosures etc in India directly on probots.co.in
We delivery electronics components and parts throughout India using standard couriers like Bluedart, Delhivery & India Post.
For order related queries contact -
Probots sells every Electronics Part for your next Project. You can order 10,000+ Electronic Parts Online - Arduino, Raspberry Pi, NodeMCU Development Boards, Sensors, Motors, Motor Drivers, SMPS, Plastic Enclosures etc in India directly on probots.co.in
We offer specialized services for Bulk, Wholesale & B2B Customers like discounted prices, additional shipping options, customised products, etc . Customer with large quantity & regular orders qualify for the specialised discounted rates.
We also offer dedicated sales team to assist you with the order process by providing sales quotations, PI, technical support for choosing products, etc.
Note: Business Orders are processed manually and usually take 1-3 days to process compared to placing the order directly on our website. Please plan your purchases accordingly.
Need Help?
For bulk enquiries contact us by -
Probots Electronics is highly regarded for its great selection of components and professional service. Customers frequently praise the awesome care and timely delivery provided by the team to ensure all products arrive safely.
● 17 min readWelcome to Vol. 12 of The Probots Showdown. Three boards. Three price points. Three very different futures for your project.Should you stick with the
Read Article →
● 10 min read12 projects. One board. Zero excuses. From a radar scanner that maps your room to a voice-controlled robot car you command with your phone — this is w
Read Article →
● 20 min readIf you have outgrown the basic “blinky” boards but aren’t ready to spend hundreds of dollars on enterprise gear, the Tang Primer 25K
Read Article →