CNC Aluminum 3-Compartment Magnetic Screw & Hardware Storage Tray for RC & Benchtop Repair

Specifications

• Material: High-grade CNC Machined Aluminum Alloy
• Finish: Anodized Red (Corrosion and wear-resistant)
• Compartments: 3 separate sorting sections (1 large, 2 small)
• Base Type: Full-coverage soft magnetic bottom pad
• Hardware Compatibility: Holds iron, steel, and other ferrous metal hardware
• Dimensions (Approx): 100mm x 100mm x 11mm (Standard footprint)
• Weight: 95 grams
• Design Profile: Rounded inner corners for easy screw retrieval; chamfered outer edges.

Applications

• RC Vehicle Maintenance: Perfect for sorting front-end vs. rear-end screws during Traxxas, Arrma, or Tamiya RC car rebuilds.
• FPV Drone Assembly: Securely holding tiny M2/M3 standoffs, motor screws, and prop nuts.
• 3D Printer Upgrades: Storing hotend nozzles, set screws, and tensioner springs during extruder maintenance.
• Electronics & PCB Teardowns: Organizing casing screws and motherboard standoffs when repairing laptops or building DIY enclosures.

Unlock New Capabilities

• Past Projects: You previously relied on plastic bottle caps, masking tape, or just hoping you wouldn't knock the table and scatter your hardware.
• The Upgrade: This tray introduces professional "knolling" (organization) to your workflow. The 3 compartments allow you to separate hardware by assembly steps (e.g., casing, motherboard, peripherals), while the magnetic base ensures parts stay locked in place.
• Effort Level: Beginner. A zero-effort tool that immediately eliminates the frustration of lost components and speeds up reassembly times.

Package Includes:

• 1 X CNC Aluminum 3-Compartment Magnetic Screw & Hardware Storage Tray (Red) for RC & Benchtop Repair

Frequently Asked Questions (FAQ)

• Will this tray hold screws if it gets bumped or tilted?
  Yes, the strong magnetic base securely holds standard steel screws and nuts even if the tray is tilted at a steep angle.
• Does it work with aluminum or titanium RC screws?
  No, aluminum and titanium are non-ferrous metals and will not react to the magnet, though the compartments will still physically sort them.
• Will the metal tray scratch my wooden desk?
  No, the bottom is covered with a soft magnetic rubber/vinyl pad that prevents the aluminum from directly contacting your work surface.
• Can I stick this tray to the side of my metal tool chest?
  Yes, the magnetic base allows it to grip onto steel toolboxes, vehicle hoods, or metal workbenches.
• What are the three separate compartments used for?
  They allow you to categorize hardware during a teardown—for example, separating exterior case screws from internal motherboard screws.
• Will the magnetic field damage my sensitive electronics?
  You should keep the tray away from bare mechanical hard drives, compass modules (magnetometers), and sensitive magnetic sensors, but it is perfectly safe for general PCBs, CPUs, and microcontrollers.
• Is the red color painted on?
  No, it is anodized, meaning the color is chemically bonded to the aluminum for higher resistance against chipping and peeling compared to standard paint.
• Can I wash or clean the tray if it gets greasy?
  Yes, you can wipe it out with isopropyl alcohol or a damp cloth. Avoid submerging it for long periods to protect the magnetic pad adhesive.
• Will it magnetize my screws?
  Yes, prolonged contact may slightly magnetize steel screws, which is actually beneficial as it helps them stick to your screwdriver tip during reassembly.
• Are the inside corners sharp or rounded?
  The internal corners are CNC machined with a smooth radius (rounded) so you can easily slide tiny screws up the wall with your finger.
• How heavy is the tray?
  It weighs approximately 95 grams—heavy enough to stay planted on your desk, but light enough for your field repair bag.