All our parts have no warranty periods which are shown on relative pages, However we assure you that the parts are free from defects in materials and workmanship. Every product Dispatched from Probots are checked for any defects and only upon through quality check the products are sent out for dispatch. For products like Electronic parts the warranty is covered only when full batch of item is defective. If defects arise during this period, we will at our option, repair or replace the goods purchased or refund your money. Our liability under this warranty is subject to us being satisfied that the material is faulty due to poor materials or workmanship. We will not be responsible for any damage caused by incorrectly connecting or improper use of the material. Furthermore, we will not be liable for any damage to third party or attached equipment to which these products are used. All decisions regarding the warranty acceptance will be taken by Probots Techno Solution and will accepted by customer. Probots Techno Solution may or may not charge for repairs and return shipping if item's warranty is void due to any reason.
Terms and Condition of Sale
Unless otherwise explicitly agreed in writing, the conditions as set out below apply to all/each transaction for the sale of goods and materials, design services by Probots Techno Solution to a purchaser of Goods and/or Services.
These conditions shall apply to all orders placed with Probots Techno Solution by the purchaser. Acceptance by Probots Techno Solution of any order is conditional upon acceptance by the Purchaser of these Conditions which shall override all other terms and conditions inconsistent herewith, whether express, implied or otherwise including terms, conditions or stipulations contained in the Purchaser's purchase order or other form of writing or other form of writing or otherwise stipulated by the Purchaser and with are at variance with or additional to these Conditions. The same shall not be binding upon Probots Techno Solution unless specifically accepted and signed by Probots Techno Solution. Acceptance of a Purchase Order by Probots Techno Solution cannot be construed or implied to create an obligation on Probot's part to accept, subsequent purchase orders for any of the goods and/or services.
1. Agreement to Terms
1.1 These Terms and Conditions constitute a legally binding agreement made between you, whether personally or on behalf of an entity (you), and PROBOTS TECHNO SOLUTIONS,located at Sai Plaza, #28 & 33, 1st, Outer Ring Rd, Nagarabhaavi, Bengaluru, Karnataka 560072(we, us), concerning your access to and use of the Features and services of thewebsite as well as any related applications (the Site).
You agree that by accessing the Site and/or Services, you have read, understood, and agree to be bound by all of these Terms and Conditions.
If you do not agree with all of these Terms and Conditions, then you are prohibited from using the Site and Services and you must discontinue use immediately. We recommend that you print a copy of these Terms and Conditions for future reference.
1.2 The supplemental policies set out in Section 1.7 below, as well as any supplemental terms and condition or documents that may be posted on the Site from time to time, are expressly incorporated by reference.
1.3 We may make changes to these Terms and Conditions at any time. The updated version of these Terms and Conditions will be indicated by an updated “Revised” date and the updated version will be effective as soon as it is accessible. You are responsible for reviewing these Terms and Conditions to stay informed of updates. Your continued use of the Site represents that you have accepted such changes.
1.4 We may update or change the Site from time to time to reflect changes to our products, our users' needs and/or our business priorities.
1.5 Our site is directed to people residing in India and Else where. The information provided on the Site is not intended for distribution to or use by any person or entity in any jurisdiction or country where such distribution or use would be contrary to law or regulation or which would subject us to any registration requirement within such jurisdiction or country.
1.6 The Site is intended for users who are at least 18 years old. If you are under the age of 18, you are not permitted to register for the Site or use the Services without parental permission.
1.7 Additional policies which also apply to your use of the Site include:
● Our Privacy Notice which sets out the terms on which we process any personal data we collect from you, or that you provide to us. By using the Site, you consent to such processing and you warrant that all data provided by you is accurate.
● Our Acceptable Use Policy , which sets out the permitted uses and prohibited uses of the Site. When using the Site, you must comply with this Acceptable Use Policy.
● If you purchase from the Site, our terms and conditions of supply will apply to the
● Certain parts of this Site can be used only on payment of a fee. If you wish to use such Services, you will, in addition to our Terms and Conditions, also be subject to our Terms and conditions of supply.
2. Acceptable Use
2.1 Our full Acceptable Use Policy , sets out all the permitted uses and prohibited uses of this site.
2.2 You may not access or use the Site for any purpose other than that for which we make the site and our services available. The Site may not be used in connection with any commercial endeavors except those that are specifically endorsed or approved by us.
2.3 As a user of this Site, you agree not to:
● Falsely imply a relationship with us or another company with whom you do not have a relationship
3. Information you provide to us
3.1 You represent and warrant that: (a) all registration information you submit will be true, accurate, current, and complete and relate to you and not a third party; (b) you will maintain the accuracy of such information and promptly update such information as necessary; (c) you will keep your password confidential and will be responsible for all use of your password and account; (d) you have the legal capacity and you agree to comply with these Terms and Conditions; and (e) you are not a minor in the jurisdiction in which you reside, or if a minor, you have received parental permission to use the Site.
If you know or suspect that anyone other than you knows your user information (such as an identification code or user name) and/or password you must promptly notify us at [email protected]
3.2 If you provide any information that is untrue, inaccurate, not current or incomplete, we may suspend or terminate your account. We may remove or change a user name you select if we determine that such user name is inappropriate.
4.Content you provide to us
4.1 There may be opportunities for you to post content to the Site or send feedback to us (User Content). You understand and agree that your User Content may be viewed by other users on the Site, and that they may be able to see who has posted that User Content.
4.2 You further agree that we can use your User Content for any other purposes whatsoever in perpetuity without payment to you, and combine your User Content with other content for use within the Site and otherwise. We do not have to attribute your User Content to you. When you upload or post content to our site, you grant us the following rights to use that content:
4.3 In posting User Content, including reviews or making contact with other users of the Site you shall comply with our Acceptable Use Policy.
4.4 You warrant that any User Content does comply with our Acceptable Use Policy, and you will be liable to us and indemnify us for any breach of that warranty. This means you will be responsible for any loss or damage we suffer as a result of your breach of this warranty.
4.5 We have the right to remove any User Content you put on the Site if, in our opinion, such User Content does not comply with the Acceptable Use Policy.
4.6 We are not responsible and accept no liability for any User Content including any such content that contains incorrect information or is defamatory or loss of User Content. We accept no obligation to screen, edit or monitor any User Content but we reserve the right to remove, screen and/or edit any User Content without notice and at any time. User Content has not been verified or approved by us and the views expressed by other users on the Site do not represent our views or values
4.7 If you wish to complain about User Content uploaded by other users please contact us at [email protected] or use the take down or report button.
5. Our content
5.1 Unless otherwise indicated, the Site and Services including source code, databases, functionality, software, website designs, audio, video, text, photographs, and graphics on the Site (Our Content) are owned or licensed to us, and are protected by copyright and trade mark laws.
5.2 Except as expressly provided in these Terms and Conditions, no part of the Site, Services or Our Content may be copied, reproduced, aggregated, republished, uploaded, posted, publicly displayed, encoded, translated, transmitted, distributed, sold, licensed, or otherwise exploited for any commercial purpose whatsoever, without our express prior written permission.
5.3 Provided that you are eligible to use the Site, you are granted a limited licence to access and use the Site and Our Content and to download or print a copy of any portion of the Content to which you have properly gained access solely for your personal, non-commercial use.
5.4 You shall not (a) try to gain unauthorised access to the Site or any networks, servers or computer systems connected to the Site; and/or (b) make for any purpose including error correction, any modifications, adaptions, additions or enhancements to the Site or Our Content, including the modification of the paper or digital copies you may have downloaded.
5.5 We shall (a) prepare the Site and Our Content with reasonable skill and care; and (b) use industry standard virus detection software to try to block the uploading of content to the Site that contains viruses.
5.6 The content on the Site is provided for general information only. It is not intended to amount to advice on which you should rely. You must obtain professional or specialist advice before taking, or refraining from taking, any action on the basis of the content on the Site.
5.7 Although we make reasonable efforts to update the information on our site, we make no representations, warranties or guarantees, whether express or implied, that Our Content on the Site is accurate, complete or up to date.
6. Link to third party content
6.1 The Site may contain links to websites or applications operated by third parties.We do not have any influence or control over any such third party websites or applications or the third party operator. We are not responsible for and do not endorse any third party websites or applications or their availability or content.
6.2 We accept no responsibility for adverts contained within the Site. If you agree to purchase goods and/or services from any third party who advertises in the Site, you do so at your own risk. The advertiser, and not us, is responsible for such goods and/or services and if you have any questions or complaints in relation to them, you should contact the advertiser.
7. Site Management
7.1 We reserve the right at our sole discretion, to (1) monitor the Site for breaches of these Terms and Conditions; (2) take appropriate legal action against anyone in breach of applicable laws or these Terms and Conditions; (3) refuse, restrict access to or availability of, or disable (to the extent technologically feasible) any of your Contributions; (4) remove from the Site or otherwise disable all files and content that are excessive in size or are in any way a burden to our systems; and (5) otherwise manage the Site in a manner designed to protect our rights and property and to facilitate the proper functioning of the Site and Services.
7.2 We do not guarantee that the Site will be secure or free from bugs or viruses.
7.3 You are responsible for configuring your information technology, computer programs and platform to access the Site and you should use your own virus protection software.
8.Modifications to and availability of the Site
8.1 We reserve the right to change, modify, or remove the contents of the Site at any time or for any reason at our sole discretion without notice. We also reserve the right to modify or discontinue all or part of the Services without notice at any time.
8.2 We cannot guarantee the Site and Services will be available at all times. We may experience hardware, software, or other problems or need to perform maintenance related to the Site, resulting in interruptions, delays, or errors. You agree that we have no liability whatsoever for any loss, damage, or inconvenience caused by your inability to access or use the Site or Services during any downtime or discontinuance of the Site or Services.We are not obliged to maintain and support the Site or Services or to supply any corrections, updates, or releases.
8.3 There may be information on the Site that contains typographical errors, inaccuracies, or omissions that may relate to the Services, including descriptions, pricing, availability, and various other information. We reserve the right to correct any errors, inaccuracies, or omissions and to change or update the information at any time, without prior notice.
9.Disclaimer/Limitation of Liability
9.1 The Site and Services are provided on an as-is and as-available basis. You agree that your use of the Site and/or Services will be at your sole risk except as expressly set out in these Terms and Conditions. All warranties, terms, conditions and undertakings, express or implied (including by statute, custom or usage, a course of dealing, or common law) in connection with the Site and Services and your use thereof including, without limitation, the implied warranties of satisfactory quality, fitness for a particular purpose and non-infringement are excluded to the fullest extent permitted by applicable law.
We make no warranties or representations about the accuracy or completeness of the Site’s content and are not liable for any (1) errors or omissions in content: (2) any unauthorized access to or use of our servers and/or any and all personal information and/or financial information stored on our server; (3) any interruption or cessation of transmission to or from the site or services; and/or (4) any bugs, viruses, trojan horses, or the like which may be transmitted to or through the site by any third party. We will not be responsible for any delay or failure to comply with our obligations under these Terms and Conditions if such delay or failure is caused by an event beyond our reasonable control.
9.2 Our responsibility for loss or damage suffered by you:
Whether you are a consumer or a business user:
● We do not exclude or limit in any way our liability to you where it would be unlawful to do so. This includes liability for death or personal injury caused by our negligence or the negligence of our employees, agents or subcontractors and for fraud or fraudulent misrepresentation.
● If we fail to comply with these Terms and Conditions, we will be responsible for loss or damage you suffer that is a foreseeable result of our breach of these Terms and Conditions, but we would not be responsible for any loss or damage that were not foreseeable at the time you started using the Site/Services.
Notwithstanding anything to the contrary contained in the Disclaimer/Limitation of Liability section, our liability to you for any cause whatsoever and regardless of the form of the action, will at all times be limited to a total aggregate amount equal to the greater of (a) the sum of £5000 or (b) the amount paid, if any, by you to us for the Services/Site during the six (6) month period prior to any cause of action arising. Different limitations and exclusions of liability will apply to liability arising as a result of the supply of any products to you, which will be set out in our Terms and conditions of supply .
10. Term and Termination
10.1 These Terms and Conditions shall remain in full force and effect while you use the Site or Services or are otherwise a user of the Site, as applicable. You may terminate your use or participation at any time, for any reason, by following the instructions for terminating user accounts in your account settings, if available, or by contacting us at [email protected] .
10.2 Without limiting any other provision of these Terms and Conditions, we reserve the right to, in our sole discretion and without notice or liability, deny access to and use of the Site and the Services (including blocking certain IP addresses), to any person for any reason including without limitation for breach of any representation, warranty or covenant contained in these Terms and Conditions or of any applicable law or regulation.
If we determine, in our sole discretion, that your use of the Site/Services is in breach of these Terms and Conditions or of any applicable law or regulation, we may terminate your use or participation in the Site and the Services or delete your profile and any content or information that you posted at any time, without warning, in our sole discretion.
10.3 If we terminate or suspend your account for any reason set out in this Section 9, you are prohibited from registering and creating a new account under your name, a fake or borrowed name, or the name of any third party, even if you may be acting on behalf of the third party. In addition to terminating or suspending your account, we reserve the right to take appropriate legal action, including without limitation pursuing civil, criminal, and injunctive redress.
11.1 If you access the Services via a mobile application, then we grant you a revocable, non-exclusive, non-transferable, limited right to install and use the mobile application on wireless electronic devices owned or controlled by you, and to access and use the mobile application on such devices strictly in accordance with the terms and conditions of this license.
11.2 The following terms apply when you use a mobile application obtained from either the Apple Store or Google Play (each an App Distributor) to access the Services:
(a) The licence granted to you for our mobile application is limited to a non-transferable licence to use the application on a device that utilizes the Apple iOS or Android operating system, as applicable, and in accordance with the usage rules set forth in the applicable App Distributor terms of service;
(b) We are responsible for providing any maintenance and support services with respect to the mobile application as specified in these Terms and Conditions or as otherwise required under applicable law. You acknowledge that each App Distributor has no obligation whatsoever to furnish any maintenance and support services with respect to the mobile application;
(c) In the event of any failure of the mobile application to conform to any applicable warranty, you may notify an App Distributor, and the App Distributor, in accordance with its terms and policies, may refund the purchase price, if any, paid for the mobile application, and to the maximum extent permitted by applicable law, an App Distributor will have no other warranty obligation whatsoever with respect to the mobile application;
(d) You represent and warrant that (i) you are not located in a country that is subject to a U.S. government embargo, or that has been designated by the U.S. government as a “terrorist supporting” country; and (ii) you are not listed on any U.S. government list of prohibited or restricted parties;
(e) You must comply with applicable third party terms of agreement when using the mobile application, e.g., if you have a VoIP application, then you must not be in breach of their wireless data service agreement when using the mobile application; and
(f) You acknowledge and agree that the App Distributors are third party beneficiaries of these Terms and Conditions, and that each App Distributor will have the right (and will be deemed to have accepted the right) to enforce these Terms and Conditions against you as a third party beneficiary thereof.
12.1 Visiting the Site, sending us emails, and completing online forms constitute electronic communications. You consent to receive electronic communications and you agree that all agreements, notices, disclosures, and other communications we provide to you electronically, via email and on the Site, satisfy any legal requirement that such communication be in writing.
You hereby agree to the use of electronic signatures, contracts, orders and other records and to electronic delivery of notices, policies and records of transactions initiated or completed by us or via the Site. You hereby waive any rights or requirements under any statutes, regulations, rules, ordinances or other laws in any jurisdiction which require an original signature or delivery or retention of non-electronic records, or to payments or the granting of credits by other than electronic means.
12.2 These Terms and Conditions and any policies or operating rules posted by us on the Site or in respect to the Services constitute the entire agreement and understanding between you and us.
12.3 Our failure to exercise or enforce any right or provision of these Terms and Conditions shall not operate as a waiver of such right or provision.
12.4 We may assign any or all of our rights and obligations to others at any time.
12.5 We shall not be responsible or liable for any loss, damage, delay or failure to act caused by any cause beyond our reasonable control.
12.6 If any provision or part of a provision of these Terms and Conditions is unlawful, void or unenforceable, that provision or part of the provision is deemed severable from these Terms and Conditions and does not affect the validity and enforceability of any remaining provisions.
12.7 There is no joint venture, partnership, employment or agency relationship created between you and us as a result of these Terms and Conditions or use of the Site or Services.
12.8 The following are trade marks and You are not permitted to use them without our approval, unless they are part of material our Site explicitly states you are permitted to use.
12.9 A person who is not a party to these Terms and Conditions shall have no right under the Contracts (Rights of Third Parties) Act 1999 to enforce any term of these Terms and Conditions.
12.10 In order to resolve a complaint regarding the Services or to receive further information regarding use of the Services, please contact us by email at [email protected]
PROBOTS - ABOUT US
Probots offers Electronics Engineering Services to get your product from concept to production. We provide the following services - Circuit Designing, PCB Designing, Embedded Firmware Development, etc. We have successfully designed 100+ products in IoT, AI & ML, Automation, Robotics, Industrial Monitoring, Generic Consumer Devices, and Medical Devices.
We help customers build their own design and prototypes by supplying electronic parts. We stock a wide range of parts that we use for manufacturing products. These products are carefully sourced from best manufacturers at bulk pricings and we pass on the benefits to our customers. We sell Arduino, Raspberry Pi, IoT Sensors, ESP32, STM32 Development Boards, Electronic Components, Prototyping Tools and Robotics Parts.
Buy Arduino, Raspberry Pi, NodeMCU ESP32, Electronic Components, Plastic Enclosures and much more at Probots - India’s Largest Engineering and DIY Store
As one of India’s biggest distributors of electronic and technological components for the Embedded Systems and Robotics, we offer more than 110,000 products at a unique price-performance ratio, with maximum availability and minimum delivery times. With our broad spectrum of electronic components we are the ideal partner for component purchasing. In our online shop electronics engineers will find ICs and microcontrollers, as well as LEDs and transistors. We also offer resistors, capacitors, and pin-and-socket connectors and relays. We have the right equipment for your workplace, including soldering stations and multimeters as well as and high-quality tools. In addition, our product spectrum includes a large selection of items from plastic enclosures accessories and HDMI cables, batteries and rechargeable batteries. Have a look at our large selection of accessories. When it comes to and as well as connectors and memory cards our emphasis is on top quality at very attractive prices. Try out our fast dispatch service and top customer support, and compare our prices: We are certain that you will soon be among our satisfied customers.
WHERE TO BUY ELECTRONIC COMPONENTS ONLINE IN INDIA?
Probots sells the following items online - Arduino, Raspberry Pi Development Boards, NodeMCU ESP8266, ESP32, Sensors Modules, Electronic Components, Plastic Enclosures for Electronics, SMPS Power Suppliers, Resistors, Capacitors, and a wide range of products. You can order online on our website and we will deliver throughout India within 1-15 days.
ONLINE SHOPPING MADE EASY AT PROBOTS
If you would like to experience the best of online shopping for Electronic Modules & Components in India, you are at the right place. Probots is the ultimate destination for Electronics & Robotics, being host to a wide array of merchandise including Arduino, Raspberry Pi, NodeMCU ESP32, Sensors, Motor Drivers, Power Suppliers, SMPS, Batteries, Electronic Components, etc. You can get every part for your next project online and stop worrying about sourcing components from multiple sources. We sell products only after careful selection among multiple vendors. You can shop online at Probots from the comfort of your home and get your favourites delivered right to your doorstep.
BEST ONLINE SHOPPING SITE IN INDIA FOR ELECTRONICS & ROBOTICS
Irrespective of your project - IoT, Robotics, Python, OpenCV, AI, ML, Embedded Electronics, Automation, etc you will find all required components at probots.co.in. You will realise that the sky is the limit when it comes to the parts used in these projects and you can purchase them online on our store.
Tools & Prototyping
BUY PLASTIC ENCLOSURES FOR ELECTRONICS IN INDIA
Probots manufactures and retails 100+plastic boxes and cases for electronic circuits. No minimum order quantity, bulk discounts available for business purchase. We make enclosures boxes for sensor nodes, controllers, IoT Products, handheld devices, wearables, wall mount devices, etc.
Probots sells generic low cost effect enclosures, high quality premium IP65 Dust and Waterproof Enclosures, Enclosures with Transparent Lids, etc We have circuit enclosures boxes for all sizes - small, medium and large PCB boards. We also have Aluminium Enclosures, ABS enclosures, PVC Enclosures, Cabinets, Metal Boxes, etc. We also sell IP65 Waterproof PVC & Metal Cable Glands and Fan Filters
BUY Arduino Board Online India
Probots sells Arduino UNO, Arduino Mega, Arduino Nano, Arduino Pro, Mini, Micro, Lilypad, Due, and other development boards online in India. These boards come with Atmega328 and Atmega2560 and are great for learning electronics and programming. Order them online for your next robotics, electronic, IoT Project.
BUY Raspberry Pi Online India
Probots sells Raspberry Pi, Pico SBC (Single Board Computer), HDMI Displays, Raspberry Pi Starter Kit. We source them from official Distributors and offer the best quality development boards at lowest prices possible. We also sell a wide range of Raspberry Pi Accesories - Raspberry Pi Cameras & Lens, Heat sink Cases for Raspberry Pi, Raspberry Pi Sensors, Raspberry PI Power supplies, etc. Buy Raspberry Pi Online Now for your next Machine Vision Project, OpenCV Project, Image processing and recognition project!
Electronic Sensor Modules Online at Probots India
Buy Online Ultrasonic Sensors, Distance Sensors, Temperature Sensors, PIR Motion Sensors, ph Soil Sensors, Encoder Sensors, Magnetic Door Lock Sensors, Gas Sensors, Accelerometers & IMU Modules, Line Following Sensors, Force Flex Sensors, Current and Voltage Sensors, Flow Sensors, Light Sensors, Biometric Fingerprint Sensors, etc. We also have the latest electronic sensors for electronics and robotics like sound and voice sensors, Gesture Recognition SEnsors, Load Cell Weight Sensors, etc. These sensors can be used with Arduino, Raspberry Pi, NodeMCU, ESP32 and other microcontrollers. Use them in your next electronics project. Order them online now.
Best Online Store for buying Electronic Components
Bits and pieces that make your project work are always hard to find. Probots has 500+ electronic components like Microcontroller ICs, LEDs, Header Pins, Connectors, Crystal Oscillators, Cables, Buzzers, Transistors, Motor Driver ICs,
Voltage Regulator ICs, ZIF & DIP Sockets, LED Holders, Switches, Potentiometers, LCD Displays, ICs, Resistors, Batteries & Holders, Heatsinks, Capacitors, Relays, Diodes, Heat shrink tubes, LED Displays, DIP Switches, Resistor Arrays, 7 Segment Displays, LED Strips, etc Chekout our wide range of electronic components and order them online in India now.
AFFORDABLE PARTS AT YOUR FINGERTIPS Probots is one of the unique online electronics shopping sites in India where components are accessible to all. Check out our new arrivals to view the latest microcontrollers, sensors and ICs in the market.
HISTORY OF PROBOTS Becoming India’s no. 1 electronics destination is not an easy feat. Sincere efforts, digital enhancements and a team of dedicated personnel with an equally loyal customer base have made Proobts the onlie platform that it is today. The original B2C venture for electronics components was conceived in 2009 but transitioned into a full-fledged ecommerce giant within a span of just a few years. By 2012, Probots introduced 350 Indian and international brands to its platform, and this has only grown in number each passing year. Today Probots sits on top of the online electronics field with an astounding social media following, a loyalty program dedicated to its customers, and tempting, hard-to-say-no-to deals.
Probots Techno Solutions offers complete turn-key Embedded Electronics Design & Engineering Services. We can work on Product Specification through Prototyping, Proof of Concept to Production depending on individual client needs.
Probots is one of the top Electronics Design companies based out of Bangalore. We provide range of Embedded Engineering Services that include Circuit Designing, PCB Designing, Customised IoT Hardware, Embedded Firmware Development, Hardware Prototyping, Proof of Concepts & Electronic Manufacturing Services.
With close to 10 years of solid experience in Electronics Design, we have successfully completed 100s of complex Electronic Product Designs across a wide range of domains - Consumer Products, Industrial, Medical and Aerospace Industries. Our team has completed projects for Fortune 500 companies as well as start-ups using both traditional and cutting edge technologies.
Probots also offers consultancy, and testing services across the product and process development life cycle.
Our biggest strength is our agile team that utilises our core experience, to deliver quick turnarounds giving you faster time-to-market.