This RepRap MK2B 3D printers Dual Power PCB HeatBed is compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed.
This Heatbed has a dual power capability allowing it to be used with 12V or 24V power supply sources.
It features a central mounting hole on the front side to allow for three-point mounting.
This is much easier for bed leveling in comparison to 4 point mounting.
Heatbed MK2B is currently the best construction of its kind in the market.
The maximum temperature which can be reached is 120°C and the device heats up from 0°C to 100°C in 5 minutes at a low voltage of 12V.
Etching: 35um copper
Dimensions 214mmx 214mm
Laminate FR4 1.6+-0.15mm
2 layer, 35um copper
Red Soldermask - both sides
White Silkscreen - both sides
Power Input: 12V or 24v
Copper plated holes
Resistance between 1.0 and 1.2 ohm