IEC C14 3-Pin AC Power Socket Module - 10A 250V with Fuse Holder & Illuminated Switch

Specifications:

• Socket Type: IEC320 C14 (Male)
  
• Voltage Rating: 250V AC
  
• Current Rating: 10A
  
• Switch Type: 4-Pin Red Illuminated Rocker Switch (DPST)
  
• Fuse Type: 5x20mm (Fuse not included, or varies by bundle)
  
• Mounting Type: Snap-Fit (Screwless)
  
• Body Material: Flame Retardant Thermoplastic (UL94V-0)
  
• Terminals: 4.8mm Quick Connect / Solder Lugs

Key Applications

• 3D Printers & CNC Machines: Clean AC power input with built-in emergency shutoff.
  
• Custom Amplifiers: Professional look with detachable power cables.
  
• Laboratory Equipment: Reliable power entry with overcurrent protection.
  
• Server Racks: DIY Power Distribution Units (PDUs).

Project Evolution

• Past Projects (Prerequisites): If you have previously built projects where the power cord was directly soldered to internal components or passed through a simple rubber grommet, you’ve likely dealt with the frustration of non-detachable cables and the constant fear of a short circuit. You’ve probably used basic inline fuses or external power strips to manage safety and switching.
  
• Feature Upgrade: The IEC C14 Module consolidates three critical functions into one footprint. By upgrading to this module, you gain Modular Portability (the ability to use any standard C13 "kettle" lead), Centralized Protection (an easily accessible fuse drawer), and Integrated Control (an illuminated switch). This setup effectively cleans up the internal "rat's nest" of high-voltage wiring and provides a single, safe point of failure that protects your entire system.
  
• Effort/Requirements: Intermediate. While the wiring logic is straightforward, this upgrade requires the ability to make a clean rectangular panel cutout (approx. 47mm x 27mm) in your enclosure. Since you are dealing with mains voltage (230V AC), precision in soldering or using 4.8mm spade connectors is vital. It is a highly rewarding upgrade that instantly elevates the safety and resale value of your custom hardware.

Virtual Technician & Wiring Guide

• HIGH VOLTAGE SAFETY: You are dealing with 230V AC. Ensure the power cord is unplugged during wiring. Use heat-shrink tubing on all terminals to prevent accidental contact with the chassis. If you are not confident with AC wiring, consult a qualified electrician.

• The 3-Pin Socket: Top/Center Pin: Earth (Ground) 

   

• Bottom Pins: Neutral (N) and Line (L). Note that the Line pin is internally linked to one side of the Fuse Holder.

• The Fuse Holder Output: A single terminal that represents the "safe" side of the fuse.

• The 4-Pin Switch: Two pairs of terminals. One pair is the "Input" (from the socket/fuse) and the other is the "Output" (to your internal power supply).

Package Includes:

1 x IEC C14 3-Pin AC Power Socket Module - 10A 250V with Fuse Holder & Illuminated Switch

Frequently Asked Questions (FAQ)

1. Does it come with a fuse?
   No, you need to buy a 5x20mm fuse separately based on your project's current needs.
2. What size is the panel cutout?
   Approximately 47mm x 27mm. Always measure the physical unit before cutting.
3. Is the switch illuminated?
   Yes, it glows red when the power is in the 'ON' position.
4. Can I use this for 110V AC?
   Yes, it is rated for up to 250V, so 110V is perfectly safe.
5. How do I wire the switch and socket?
   The back has 4.8mm lugs. Usually, the Line wire goes through the fuse to the switch and then to your circuit.
6. Is it screw-mounted or snap-fit?
   This specific model is snap-fit, meaning it clicks into the panel.
7. What material is the body made of?
   High-quality, flame-retardant thermoplastic.
8. Can it handle a 2000W load?
   10A at 250V is 2500W, so it can handle 2000W, but ensure your wiring is also rated for it.
9. Are the terminals solderable?
   Yes, you can either use crimp connectors or solder wires directly to the lugs.
10. Does it include the power cable?
    No, this is just the panel-mount socket module.
11. Is there a cover for the back?
    No, the back terminals are exposed for wiring. We recommend using heat-shrink tubing for safety.
12. Can the switch be replaced?
    The switch is integrated but can be popped out for replacement if needed.
13. Is it Probots™ Lab Verified?
    Yes, we verify the terminal conductivity and housing heat resistance.
14. What is the current rating for the switch?
    The switch is rated for 10A, matching the socket.
15. Does the ground pin connect to the chassis?
    The middle pin is for Ground (Earth). You should wire it to your machine's metal chassis.
16. Why use this instead of a direct wire?
    It allows for a detachable cord, is much safer, and includes a fuse and switch.
17. What happens if the fuse blows?
    The circuit opens and power is cut. You simply replace the fuse in the drawer.
18. Is the fuse drawer easy to open?
    Yes, it can be opened with a small flat-head screwdriver even when the power cord is plugged in.
19. Is it 50Hz or 60Hz compatible?
    It works perfectly with both.
20. Can I use it for a DIY PC case?
    Absolutely, it uses the standard C14 connector common in PC power supplies