New Products


12V Cabinet Door Lock Solenoid

This is a simple to us 12V Electronic Cabinet/Door Lock. You can use it to lock and unlock Cabinets/Doors using a 12V power supply. These Locks are...


Rs. 449.00
Add:

F550 Hexacopter Frame Kit for Aeiral Photography and FPV

This hexacopter frame is made from advanced engineering materials, for maximum strength and least weight. The main frame is glass fiber while the...


Rs. 2,499.00
Add:

S550 Hexacopter Frame Kit for Aeiral Photography and FPV

This hexacopter frame is made from advanced engineering materials, for maximum strength and least weight. The main frame is glass fiber while the...


Rs. 5,999.00
Add:

LiPo 4S 5000mAh 50C Lithum Polymer Battery Pack for Quadcopter

This high performance LiPo Battery pack is specifically manufactured to be used with quadcopters, multirotors and RC Planes. It is a 4 Cell 5000 mAh..


Rs. 6,500.00
Add:

5V Solenoid Linear Actuator DC Motor Miniature Electromagnet

Solenoids are basically electromagnets: they are made of a coil of copper wire with an armature (a slug of metal) in the middle. This is a special...


Rs. 299.00
Add:

Plastic Worm Gear Mod 1.6 with 6mm Shaft

This is a high quality plastic worm gear. Use it to get the desired speed and torque from your motor. Worm gears are along with pinion or spur gears..


Rs. 75.00
Add:

Plastic Pinion Gear 25T Mod 1.6

This is a high quality plastic pinion gear. Use it to get the desired speed and torque from your motor. It comes with a 6mm bore and a set screw...


Rs. 70.00
Add:

T Cobbler Breakout Board for Raspberry Pi with Cable

The Pi T-Cobbler is an extension board designed to break out the 40 GPIO pins found on the Raspberry Pi B+ boards. It connects via a 40-pin ribbon...


Rs. 349.00
Add:

OLED Display Blue 0.96" 128 x 64 SPI I2C for Arduino Raspberry

These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. This display is made of 128x64...


Rs. 299.00
Add:

SMPS Plastic Enclosure - Medium (PEM09) for Power Supplies

This plastic enclosure is specially designed for SMPS Power Supplies but can be used for general purpose project housing. It is just like the...


Rs. 60.00
Add:

Mini Breadboard Solderless Electronics Prototyping 170 Points

Use this small size breadboard to build, test and prototype small circuits and projects rapidly without the need for any soldering. It works great...


Rs. 59.00
Add:

Breadboard for Electronics Solderless Prototyping 400 Points

Use this medium size breadboard to build, test and prototype circuits and projects rapidly without the need for any soldering. It works great for...


Rs. 69.00
Add:

X525 Quadcopter Folding Frame V3 Fiber Glass

This is quadcopter frame is made from advanced engineering materials, for maximum strength and least weight. The main frame is glass fiber while the..


Rs. 1,899.00
Add:

LiPo 4S 3300 mAh 35C Lithum Polymer Battery Pack for Quadcopter

This high performance LiPo Battery pack is specifically manufactured to be used with quadcopters, multirotors and RC Planes. It is a 4 Cell 3300 mAh..


Rs. 4,399.00
Add:

nRF24L01+PA+LNA Long Range High RF Wireless Transceiver Module

This is a high power, long range and easy to use RF wireless transceiver module based on the popular nRF24L01 from Nordic Semiconductor. It works at..


Rs. 299.00
 Sold Out 
Foot Pedal Switch SPDT

This is a foot petal switch used in tattoo machines, sewing machines, and many other industrial machines. Great for accepting inputs from foot taps!..


Rs. 549.00
Add:

Arduino Pro Mini Atmega328 Compatible Board 5V 16Mhz

Arduino is an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. It's intended for artists,...


Rs. 220.00
Add:

NodeMCU IoT WiFi Development Board ESP8266 with CP2102

This is the latest NodeMCU Board with ESP8266-12e. It comes with bigger flash size, more IO pins and a smaller board size! The NodeMcu is an...


Rs. 449.00
Add:

Breadboard Power Supply Regulator Module 5V 3V3 Board MB102

Use this power regulation module to provide 5V and 3V3 power supply to your breadboard based project.This power supply board is designed to plug into.


Rs. 109.00
Add:

Color Sensor TCS3200 Module for Arduino Raspberry Pi

TCS3200 GBB Color Sensor For Arduino is a complete color detector, including a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 can detect..


Rs. 349.00
Add:

Case for Raspberry Pi 3 Model B ABS with Screws Black

This is a high Quality ABS Plastic Case for the Raspberry Pi. It is compatible with the Raspberry Pi 3 B, Raspberry Pi 3 B+, Raspberry Pi 2B. It...


Rs. 199.00
Add:

Arduino Nano V3 Atmega328 CH340 IC 5V Board

The Arduno Nano is the small and compact breadboard compatible version of the Arduino UNO. It has the same Atmega328 microcotroller of the UNO with...


Rs. 249.00
Add:

DRV8825 Stepper Motor Driver Controller for StepStick 3D Printer

This module can drive one stepper motor. Use this board to control your stepper motor from your microcntroller, Arduino, RaspberryPi, etc. It uses...


Rs. 199.00
Add:

A4988 Stepper Motor Driver Controller for StepStick 3D Printer

This module can drive one stepper motor. It uses the hugely popular Allegro A4988 IC. The stepper motor can be controlled through just 2 pins - one...


Rs. 129.00
Add:

12V Mini Water Pump Submersible

This is a mini submersible type water pump that works on 12V DC. It is extremely simple and easy to use. Just immerse the pump in water, connect a...


Rs. 299.00
Add: