E3D J-Head Hotend Direct Drive with Cooling Fan V6 3D Printer

₹699.00
Out of stock
SKU
PRO654

These E3D 3D printer Hot Ends are regarded as one of the best metal hot ends for 3D Printers. They are suitable for printing the widest range of print materials with excellent print results, allowing for soft flexible materials and higher temperature filaments such as polycarbonate and Nylons. They offer comparatively better print quality compared to other hotends.

The E3D J Head Hotend comes in two types - Direct Drive and Bowden Drive. This is the Direct Drive model. On the direct drive, the bulky extruder is mounted on the hotend. This results in simplicity during construction, usage and maintenance. But Bowden Drive Extruders offer best print quality. Chose Direct drive for easy assembly and maintenance and Bowden Drive for best print quality.

These well crafted hot ends are renowned for their print quality, minimal blockading, fast response and efficient thermal properties, eliminating hot ends meltdown failures associated with PEKK/PTFE designs. This hot ends with the supplied thermistor can reach 300 degrees C (can reach 400 degree C with however may require additional electronics) and will heat from 20C to 200C in 65 seconds and the temperature control responsiveness will keep the HotEnd within 0.5 degrees C.

We also offer a large range of nozzle sizes to suit your 3D Printing needs. 0.4mm is standard and comes with this hotend.

Specification

  • Hotend size: 70 mm
  • Material: All parts are in metal
  • Weight: 80 gms (approx)
  • Nozzle size: 0.4 mm
  • Filament size: 1.75 mm
  • Filament Support: PLA,ABS,PC,PVA,WOOD,HIPS,NYLON, Flexible, Carbon Fiber
Features
  • 12V 40W cartridge Heater
  • 100K ohm NTC thermistor
  • Stainless steel heat sink
  • 30 * 30 mm fan with fan holder
  • Has a low chance of blockage compared to other hotends
  • Easy to use
  • Complete J-head hotend assembly
Package Include
  • All metal E3D V6 hotend
  • Heat Sink + Heater + Thermistorde
  • Fan + Fan holder

Write Your Own Review
You're reviewing:E3D J-Head Hotend Direct Drive with Cooling Fan V6 3D Printer
Your Rating
Copyright © 2013-present www.probots.co.in All rights reserved.