The Mega Pro Embed CH340G / ATmega2560 board is based on the ATmega2560 microcontroller and the USB-UART adapter CH340. The board is compatible with Arduino Mega 2560. The board has a compact form factor of
38 x 55mm and is an excellent solution for developing projects based on ATmega2560.
The Mega Pro Embed functionalities are compatible with Arduino Mega 2560. Even though it is an Embed board, it is solid as stable as the Mega Board. It uses the original chip, and 16 MHz high-quality quartz resonators are present on the board. The board has a Micro USB connector that allows you to connect the microcontroller to the computer via the USB-UART adapter CH340.
The board can be powered directly through the Micro USB connector, or via the corresponding contact on the board (Vin). The voltage regulator allows to use of up to 18V as an input value, however, we do not recommend exceeding the recommended values aforementioned, since this can lead to excessive heat and damage the device.
(A driver installation may be required).
Download drivers: Windows, Linux, Mac, Android
USB-TTL converter: CH340
Power IN.: 5V
Power IN. VIN/DC Jack:5V
Power Consumption: 5V 220mA
Logic Level: 5V
USB: Micro USB
Clock Frequency: 16MHz
Operating Supply Voltage: 5V
Digital I/O: 54
Analog I/O: 16
Memory Size: 256kb
Data RAM Type/Size: 8Kb
Data ROM Type/Size: 4Kb
Interface Type: ISP
Operating temperature −40С°/+85С°
Length x Width :38mm×54mm
1 x Programmable 2560 Mini CH340 Development Board Stick Compatible with Arduino Mega